GE Dryer Heating Elements
ByMost dryer heating elements last many years , some seem to only last 3 years or less. Why is this? Its Mainly due to poor air circulation through the dryer and out the customers exhaust vent.
If you notice clothes taking over 1 hour to dry, then this may be the main problem to short heating element life.
A simple test: Pull the dryer away from the wall, disconnect the exhaust hose, let the exhaust air just blow into the room for 1 load.
If you notice the dryer drying the clothes faster, then you have solved the problem. The problem is in your vent exhaust hose, either clogged or something is restricting the air flow where the end of the exhaust hose comes out.
Common GE / Hotpoint Dryer Heating Elements
Heating Element
P/N: WE11X103
Dryer Heating Element used on many GE brand electric clothes dryers. Has a coil diameter of 5/8 in. For element restring kit only use P/N WE11X203.
Heating Element
P/N: WE11M23
Dryer Heating Element used on many GE brand electric clothes dryers. Has a coil diameter of 1/2 in. For restring kit only use p/n WE11X10007.
Have a good evening!
Forecast for South Willamette Valley
…including cities of Eugene, Springfield, Corvallis
Tonight: Mostly cloudy with a chance of showers. Then a slight chance of showers after midnight. Patchy fog after midnight. Lows around 40 light wind..
Wednesday: Mostly cloudy. Patchy fog in the morning. Highs 50 to 55 light wind..
I have a dryer that’s lint screen tore, and I patched the tear up with some duct tape (what else
Drying takes about 1.5 to 2 hours, could this be the cause?
Hi Indy,
My old dryer of 15 years did the same thing, with the lint screen torn.
Some lint could have got down in the duct collector(Blower Wheel Housing) underneath the filter, causing the long dry times, also check by doing my test above.
“test: Pull the dryer away from the wall, disconnect the exhaust hose, let the exhaust air just blow into the room for 1 load.
If you notice the dryer drying the clothes faster, then you have solved the problem. The problem is in your vent exhaust hose, either clogged or something is restricting the air flow where the end of the exhaust hose comes out.”
Hope that helps Indy.
Jake