« Water Valve | Main | Washing Machine Timer »
August 06, 2005
Motor and Heater Relay's
2003 Kenmore Evenheat Dryer made by Whirlpool(Model#11063952102):
When you push the start button it starts, but when you release the button it stops, won't stay on. Alot of the times the control board causes this, but this time the motor relay was out. I replaced the motor relay, the dryer kept running like its suppose to, but it would not heat, I ohmed the 2 left side smaller connections and found the heater relay with no continuity. So i replaced that relay, same Part#3405281.
Part#3405281
Motor/heat relay
Have a good evening!
South Willamette Valley
...including cities of Eugene, Springfield, Corvallis
Issued: August 06, 2005 21:29:27 PDT
Tonight: Clear. Lows around 55. North wind 5 to 15 mph.
Sunday: Sunny. Highs 85 to 90. Light wind becoming north 10 to 15 mph in the afternoon.
Posted by Jake at August 6, 2005 11:36 PM
Comments
Post a comment
Thanks for signing in, . Now you can comment. (sign out)
(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)