« Refrigerator Door Gasket | Main | Kenmore Timer »
November 07, 2005
Range Bake Element
Sears Kenmore Electric Range made by Whirlpool (model#665.95002101): Oven is not heating when the bake cycle is on, I always make sure the range is receiving 240 volts at the range terminal block, a volt/ohm meter is a necessity. If that checks ok, then I check the the bake element for continuity with the ohm meter, make sure the power to the range is off first before testing the bake element for continuity.
There was no continuity in the bake element, when i checked it.
Part#8053713
Oven bake element assembly with push-on terminals
Have a good evening!
South Willamette Valley
...including cities of Eugene, Springfield, Corvallis
Issued: November 07, 2005 14:43:40 PST
Tonight: Mostly cloudy in the evening...then partly cloudy. A chance of showers. A slight chance of a thunderstorm this evening. Colder. Lows 30 to 35 light wind..
Tuesday: Partly cloudy with a slight chance of rain. Highs around 50. South wind 5 to 10 mph.
Posted by Jake at November 7, 2005 06:36 PM
Comments
Post a comment
Thanks for signing in, . Now you can comment. (sign out)
(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)