|
|||||||
| Classifieds | Look-Up & Order Appliance Parts | Monthly Newsletter | Shop Home Appliances | Appliance Blog Home | Appliance News |
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
I have an amana gas dryer Model ALG643RBW with the following "symptoms"
1. The timer will only advance on the timed dry setting and not on the perm press, automatic or other settings. 2. On the timed dry setting I took off the front cover and watched the element heat and ignite at least 4 times but after a period of time it stops doing this. It will only heat for about 15 minutes. Then it will advance to the end of the cycle without heating again. It will also heat on the perm press and automatic setting but only for a short time and it never advances. 3. After it has been tumbling for a while it goes through a period where it sounds rough or gravely. This seems to be indepent of the heating cycle and may be a totally different issue. Any help I can get would be greatly apprciated. |
|
#2
|
||||
|
||||
|
Hi,
1 of 2 things may be happening, either the flame is going out due to the high-limit thermostat shutting it down prematurely or your gas coils are bad. First, pull your dryer away from the wall, then take the exhaust hose off and just start an empty load and let the air blow into your laundry room and see if the flame stays on, if it does, that means you have a exhaust vent restriction to the outside of your house. If the flame still doesn't stay on then your gas coils are bad. Here's the gas coil kit for your model: Manufacturer part number 279834 is RepairClinic item number 3479 279834Let us know what you find. Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances |
|
#3
|
|||
|
|||
|
Thanks Jake, I'll give that a try. I really appreciate the help. And thanks for the link to the proper coils.
BC |
|
#4
|
||||
|
||||
|
Glad to help BC.
![]() Keep us posted. Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances |
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FIXED] Gas does not light - Amana LG9209W2 | rlsmith | Amana | 5 | March 24th, 2009 12:42 AM |
| GE Gas Dryer DSXH43GV0 not heating up | sawtoothfix | GE/Hotpoint | 6 | December 16th, 2008 09:38 PM |
| Kenmore Gas Dryer not heating | chaos | Sears Kenmore | 4 | April 28th, 2008 10:01 PM |
| Kenmore gas dryer 417.91142000 heating problem | noelkempf | Sears Kenmore | 2 | April 4th, 2007 04:03 PM |
| Kenmore 70 series gas Dryer not heating right | pflowers | Sears Kenmore | 1 | February 12th, 2007 07:14 PM |