GLD3450RBD0 I think just over a yr old dead again

[sarahw822]

had the ? control panel replaced on my previous unit 3x then finally had it completely replaced with a new unit. I believe it's been just over one year that I've had this fridigaire Gallery dishwasher and now it's got a cryptic message again. A backwards E (almost a backwards 9) and a part of another (almost) backwards 4.

It happened just after I shut the water off so I could replace the spray nozzle on my sink. That shouldn't have affected anything should it?

I am at a loss as to what to do. I know it'll be weeks before the place I bought it from can send someone out.

HELP
Sarah

[Jake]

No, just shutting the water off to it shouldn't have caused it.

Please check your model# again.

Jake

[sarahw822]

I checked the model # on the unit and on the registration card... that didn't get sent in.

GLD345 zero RDB zero

That's what it says.

I asked my brother in law if he'd help me pull it out so I can unplug it and he told me it'd be easier to just trip the breaker... that's what I did and it's working again!

Must have just had a hiccup?

Thanks for checking into it though!
Sarah

[Jake]

I see, you had the DB crossed in the original model# you posted.

GLD3450RDB0 is a good model#.:)

Glad its working again, if it does it again, its possibly the control board malfunctioning.

Here's the control board for your model:
Manufacturer's Number: 154569301
(http://click.linksynergy.com/fs-bin/click?id=YO6223WzStY&offerid=122738.568366648&type=10&subid=)http://ad.linksynergy.com/fs-bin/show?id=YO6223WzStY&bids=122738.568366648&type=10&subid=
http://www.appliancepartspros.com/PartImage.aspx?imgid=Z3BqLjBfaHRfMTAzOTY1NDUxL0lDV y9zb3RvaHB0cmFwLw%3d%3d (http://click.linksynergy.com/fs-bin/click?id=YO6223WzStY&offerid=122738.568366648&type=10&subid=)http://ad.linksynergy.com/fs-bin/show?id=YO6223WzStY&bids=122738.568366648&type=10&subid=

Jake