Whirlpool range SF365PEGW burner ignition replacement parts

[mjdaniels2]

Hi,

I have a Whirlpool SF365PEGW range, and on the front 2 burners, the ignition spots are worn/cracked, so that the spark isn't directed properly & the burners don't light.

Can you please help direct me to the replacement parts for these? Also, as long as I'm asking, what would be the replacement parts for the back 2 burners?

Thank you very much!
Matt

[Jake]

Hi,

This thread is identical to your model, the parts listed are the same that you will need for the burner igniter's:
http://www.applianceblog.com/mainforums/showthread.php?t=2218 (http://www.applianceblog.com/mainforums/showthread.php?t=2218)

Jake

[mjdaniels2]

Hi Jake,

Thank you for helping me identify the parts for the rear burners. I've also identified the ones for the front burners (once I figured out the difference is in the length of the wire).

Now I'm stumped, though: I've gotten to the part of installing the new ignitor, but I can't get the ceramic end to fit into place (i.e., in the hole from which I removed the old ignitor). Is there some special trick to this?

Any help would be greatly appreciated.

Matt

[Jake]

It should just fit in that hole snug. Just push the wire through the hole first then the igniter will sit snug in that hole.

Jake