Jennair oven trouble

[danstatz]

Hi, Have a Jennair svd48600b electric oven/gas cooktop. When the front-right gas burner is turned on, sometimes, the touch pad shows fc error code and beeps until the circuitbreaker is reset. This may not happen for a week, or it may happen 3 times in a day. Nothing electric works during the fc code except the downdraft fan will work when the grill side is turned on. Occasionally, it will flash the code and beep on its own. The touchpad was recently replaced. All was ok for 3-4 months. Dan

[Jake]

Hi,

FC error code:
Communication error between boards

Possible cause:
Wiring harness or power relay board (PRB)

If your wiring harness checks ok, then you would need to replace that relay board.
Here is the one for your model:
Relay board (http://www.repairclinic.com/referral.asp?R=1265&N=400658)

Jake