PDA

View Full Version : Oven will bake but not broil..... F1 code


Pat Gaskins
October 18th, 2006, 12:24 PM
Model RS6755XYN (a 0-5 could be added to the end). S# XC2601637. It's not the long thermostat in the oven. It's okay. I don't know how to remove the front of the stoves top panel where the electronic control panel is located. If I knew how to remove it I could check components inside and hopefully be able to fix it from there. Also, Is there a fuse somewhere? Suggestions please as to what the problem could be and how to get to the control panel in the stove. . . When I push the broil section on the panel and the start section I get the F1 on the display. I replaced the broiler grid already..........

Jake
October 18th, 2006, 01:21 PM
Hi,

Your range was made in 1994, you will need a new control board to fix it.

Its very expensive at $232, but here it is:
Control Board (http://www.repairclinic.com/referral.asp?R=1265&N=497305)

This model is extremely difficult to open up if you have never done it before.

I would recommend investing that money into a new range, as other parts will be on the verge of going out as well.

Jake