Jenn-Air Downdraft Range error code F1-7

[avance81]

I recently purchased a used Jenn-air range (looks similar but older than Model #JES9860B). It has a wiring diagram in the bottom kick panel with that reads File/Part No. 8104P696-60 in the corner. I plugged it in and it started beeping and flashed error code F1-7. The burners worked but nothing else. Any help would be great.

[avance81]

I checked the range again. When I plug it in, it reads "power interuption" twice. It starts beeping. It then says to set the clock. About a minute later, it starts beeping like crazy and reads the error code "F1-7" and says to contact a service tech. When I tried the burners (they are the ceramic electric I think, they have a flat piece of glass covering the heating elements), no matter what setting I set them to it seems like they heat to the highest setting, then I hear a click and it looks like it shuts off. Nothing else works (fan or stove). Some of the buttons on the control panel will beep when I push them, but no visual change.
Thanks again for the help.

[Jake]

It sounds like your control board assembly is bad, thats a very costly part.

Jake

[avance81]

Do you know where it is located on the range and what it looks like? The person I got the stove from has another one just like it, and I might be able to convince him to let me take the control board assembly off the other one.
Thanks

[Jake]

We would need you to post the model# (http://www.applianceblog.com/mainforums/showthread.php?t=1024) of your range here to see.:)

Jake

[avance81]

Model #JES9750AAB
S/N 15716191AE

Thanks again

[Jake]

Its #5 here:
http://www3.sears.com/imaging/ImagePageJava.shtml?productTypeID=0124160&brandID=1266&modelDesc=SLIDE-IN%20RANGE%2C%20ELECTRIC&modelNumber=JES9750AAB&documentID=M0603271&documentTypeID=PLDM&documentClassCode=PV&titleType=CONTROL%20PANEL/TOP%20ASSY&titleID=00003

Here is a new one for your model:
Clock w/harness (http://www.repairclinic.com/referral.asp?R=1265&N=1009033)

Jake