PDA

View Full Version : Whirlpool SF375PEEN drawer glides


mhackney
November 26th, 2006, 08:15 AM
Hi all, while I am at fixing my ignitor, I thought I would fix the drawer too. The glides attached to the rear of the drawer are in tact and functioning. However, the front of the drawer is unsupported and I suspect there is some sort of glide mechanism that has broken off. By the time the SO told me about it, the part/s were long lost. Looking at the parts on ReparClinic - this part 722224 (http://www.repairclinic.com/referral.asp?R=1265&N=722224) looks like the rear glide but it is hard to tell from the photo. This one 504563 (http://www.repairclinic.com/referral.asp?R=1265&N=504563) looks different so I suspect it is the front glide. Can anyone verify this and tell me where the front glides install please? I suspect the install on the cross bar below the drawer.

Cheers,
Michael

Jake
November 26th, 2006, 11:53 AM
Here is a photo of your drawer:
http://www3.sears.com/imaging/ImagePageJava.shtml?productTypeID=0124200&brandID=1198&modelDesc=GAS%20RANGE%20AND%20OVEN&modelNumber=SF375PEEN0&documentID=O2024575&documentTypeID=PLDM&documentClassCode=PM&titleType=DRAWER%20AND%20BROILER&titleID=00005
#9 is part 722224 (http://www.repairclinic.com/referral.asp?R=1265&N=722224).
#5 is part 504944 (http://www.repairclinic.com/referral.asp?R=1265&N=504944).

Here is shows #33 as the front glides:
http://www3.sears.com/imaging/ImagePageJava.shtml?productTypeID=0124200&brandID=1198&modelDesc=GAS%20RANGE%20AND%20OVEN&modelNumber=SF375PEEN0&documentID=O2024575&documentTypeID=PLDM&documentClassCode=PM&titleType=CHASSIS&titleID=00004
#33 part 504563 (http://www.repairclinic.com/referral.asp?R=1265&N=504563).

Jake

mhackney
November 26th, 2006, 01:50 PM
Thanks Jake, looks likepart #33 is what I need!


cheers,
Michael

Jake
November 26th, 2006, 10:46 PM
Glad to help Michael.:)

Jake