PDA

View Full Version : Frigidaire model #FDB956RBC1


matt2fer
December 4th, 2006, 05:58 PM
Hi everyone:

Would anyone have a clue as to what in the world it means when all of the status indicator lights as well as the 6 HR delay light are flashing? Being a pilot, flashing lights are not usually a good thing. I can only imagine that something is afoul. We've had the dishwasher for three years and have had no problems up to this point. In addition to the flashing lights, the unit is totally unresponsive to any commands (my wife says the same thing).

Thanks and kind regards,

Matt

Jake
December 4th, 2006, 11:43 PM
Hi Matt,

Try to turn your breaker off to the dishwasher for about 5 minutes to see if it will reset.

If it doesn't reset then your control board and control panel will need to be replaced.

http://www.repairclinic.com/dbimages/00000943/00285056.jpgControl Board (http://www.repairclinic.com/referral.asp?R=1265&N=949260)

http://www.repairclinic.com/dbimages/00000856/00258992.jpgControl Panel Insert (http://www.repairclinic.com/referral.asp?R=1265&N=949250)

Jake

hiho
December 9th, 2006, 08:39 AM
I don't mean to scare you but this is what happened to mine a few months before the circuit fried, smoked and could have burnt down my house.