PDA

View Full Version : Frigidaire Gallery Professional Series


Nicky324
March 8th, 2007, 06:10 AM
My dishwasher model number GPDB998JC0 Has a few problems.
#1 It adds time to itself during the cycle both racks. Havent checked any others but for that one it adds 12 minutes at about 60 mins left and 12 mins at rinse stage around 12 mins left.
2 during the rinse cylce it clicks by the control board sounds like relays and the motor pauses with each click. Sometimes the lights flicker but not always.
3 I was always getting a PF Power fauilure during each cycle but I had two complete runs so far and I think it may have been silverware obstructing the closing of the door. It gets caught between the door and tub.
Thanks in advance.. Nicky

Jake
March 9th, 2007, 10:50 AM
Sounds like your control board is malfunctioning, I replace these the most on this model.

Here is a new one you can order:
http://www.repairclinic.com/dbimages/00000520/00157713.jpgElectronic control board (http://www.repairclinic.com/referral.asp?R=1265&N=890303)

Jake

Nicky324
March 12th, 2007, 06:32 AM
Thanks Jake. I will check that out and post back..

Jake
March 12th, 2007, 11:05 PM
Sounds good Nicky.:)

Jake