June 2nd, 2008, 07:56 PM
Bosch WTA 3500 UC 80/IV
All Lights work. Function buttons seem to change functions. When I push start button "Drying" light comes on but nothing happens.
June 2nd, 2008, 09:44 PM
There is a "NTC" temp sensor that is listed as R3 that reads open. The schematic says 18K. It looks like a sensor. It's in a plenum with what appears to be heaters and a Overheat Thermostat. I'm looking at schematic 5185418AA7.
June 2nd, 2008, 10:36 PM
I double checked NTC sensor. It checks good. I had the meter on the wrong scale. I think my problem may be the motor overload. Does anyone know the P/N I could not find it on the on line parts list. I am currious if it's easy to get to.
June 4th, 2008, 01:04 AM
I know very little about Bosch appliances, so I asked in AJ's forum, here's the reply I got from Chris:
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present
Look-Up & Order Parts
By mpadberg in forum Bosch
Last Post: October 19th, 2012, 09:13 AM
Last Post: September 7th, 2007, 04:21 PM
By dglen in forum Washers
Last Post: May 11th, 2007, 06:03 PM
Last Post: April 3rd, 2007, 04:39 PM
By Renaldo in forum Bosch
Last Post: May 9th, 2006, 06:03 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!