|
|||||||
| Classifieds | Look-Up & Order Appliance Parts | Monthly Newsletter | Shop Home Appliances | Appliance Blog Home | Appliance News |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
October 25th, 2007, 03:08 PM
|
|||
|
|||
GE Control Board WB27K5273
Am replacing the controal board (part # WB27K5273) - new part number has changed and is #WB27T10265.
I am a plug and play person, and these are not 100% identical. Old one has BAKE (yellow wire) BROIL (Purple wire) and L1B (Black wire, which then runs over to the N tab (negative). The new unit has 2 plugs (tabs) on the BAKE component, and 3 plugs (tabs) on the BROIL component. The L1B tab has either moved (onto Broil???) or is absent. What do I do?? 
|
|
#2
October 26th, 2007, 10:57 AM
|
||||
|
||||
|
Did it come with an instruction sheet to tell you where the wires go now?
I remember changing this part before, and it was a complete nightmare, the wiring wasn't long enough, missing terminals, etc. It can with an instruction sheet but the printing on it was so bad, I couldn't figure it out either. I called GE tech. line and they were stumped as well. I had to have GE come out to see what was going on. Here's that part, there's an asterisk on it as well: Manufacturer part#WB27T10265 is RepairClinic item#832673 *Wiring could differ from original, will possibly need to be installed by an appliance repairperson.  Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| motor, motor control or control board??? | bosshogg | Maytag/Magic Chef/Admiral/Jenn-Air | 5 | June 21st, 2007 10:02 AM |
| MAH5500A control board help | bosshogg | Maytag/Magic Chef/Admiral/Jenn-Air | 1 | June 13th, 2007 07:28 PM |
| Maytag Neptune Control Board Issue | tim205 | Maytag/Magic Chef/Admiral/Jenn-Air | 1 | January 17th, 2007 09:46 PM |
| GE JVM2070SK - 2nd control board dead | dfenwick | GE/Hotpoint | 2 | July 3rd, 2006 10:24 PM |
| how to change a control panel AND a control board | corkyone | Sears Kenmore | 2 | April 28th, 2006 11:17 PM |
Linear Mode
