My GE built-in double oven JKP56 (followed by A0A1AA, including color code for almond) is not working correctly. The problem didn't manifest itself all at once. The problem is only in the upper oven. The lower oven works fine.

It started with the convection oven not keeping temperature. It would heat up, then start cooling off even though the temperature indicator showed 350 or whatever temperature it originally attained. But at this point in time (a few weeks ago), normal bake and broil both worked in the upper oven.

A few days ago, all heating stopped working in the upper oven - no bake, broil, convection bake, or automatic cleaning. The indicator pad lights up appropriately, the oven light works, the convection fan operates when it's in convection mode. but no heat from any source.

This oven is about six years old, and came with a new house.

Again, this only affects the upper of the two ovens in this built-in unit.

Ideas, please? Thanks.

Hi,

If your not getting any heat from the bake or broil elements, its a good chance the control board has gone out.

Its a pretty costly board, and on some models the wiring will have to be changed quite abit, which is very difficult. A appliance repair tech. is recommended on this part.

Here is the link:
Part#WB27T10052

Attached Thumbnails

 

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances