-
October 15th, 2007, 05:59 PM
#1
KitchenAid KBRO36FTX icemaker won't make ice
Any help with this problem is greatly appreciated!
Also, if there's anything I can check on this icemaker and where would I get a schematic or guide to taking it apart?
Many Thanks!
-
October 15th, 2007, 06:19 PM
#2
Model number is not working, re-check it....
-
October 15th, 2007, 06:34 PM
#3
model number is: KBRO36FMX01
Exactly as it is written inside the door.
-
October 15th, 2007, 06:51 PM
#4
No schematic shown but this has the breakdown pages... could be the icemaker, thru tube frozen with ice or the fill valve not feeding water, need to see if you have voltage to the valve when the ice maker calls for water but check that thru tube for a clog of ice first....
-
October 15th, 2007, 06:54 PM
#5
-
October 16th, 2007, 07:05 AM
#6

Originally Posted by
Pegi at Sams
No schematic shown but
this has the breakdown pages... could be the icemaker, thru tube frozen with ice or the fill valve not feeding water, need to see if you have voltage to the valve when the ice maker calls for water but check that thru tube for a clog of ice first....
OK, thank you for your help.
-
October 19th, 2007, 07:33 PM
#7
Pegi, as per my reply under kitchen aid oven, it's fixed. Many thanks for your help.
-
October 19th, 2007, 07:39 PM
#8
Cool, you are welcome...
-
October 21st, 2007, 11:25 AM
#9
I spoke too soon............seems it made 3 batches of ice and now the icemaking tray is full of ice but it's not dumping it!
Any ideas?
-
October 21st, 2007, 02:35 PM
#10
Sounds like you need a new module head fior the ice maker perhaps??
Similar Threads
-
By rhayward in forum KitchenAid
Replies: 14
Last Post: August 31st, 2011, 01:29 PM
-
By tolbertr in forum Whirlpool/Roper/Estate
Replies: 2
Last Post: September 22nd, 2010, 01:57 PM
-
By piac in forum KitchenAid
Replies: 4
Last Post: January 21st, 2007, 11:35 PM
-
By icecat14 in forum KitchenAid
Replies: 1
Last Post: February 7th, 2006, 09:35 PM
-
By rsirmans in forum Undercounter / Freestanding / Stand Alone Ice Makers
Replies: 3
Last Post: December 10th, 2005, 10:14 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!