Maytag MDB9100AWW front panel hums, does not work - ApplianceBlog.com

JoeyD · #1 January 18th, 2009, 08:47 AM

Hi,
Our dishwasher is no longer working. For a while it would work intermittently, but late last night the front panel did something strange. Both the clean and lightwash buttons were both flashing, ~1 flash/second.
Now no lights come on, and the front panel hums a sad song.

***Jake*** · #2 January 18th, 2009, 10:56 AM

Hi JoeyD,

It sounds like your control board is out.

They make 3 different ones for this model, please post your serial# and I can tell you which one yours takes.

Jake

JoeyD · #3 January 18th, 2009, 10:03 PM

Thanks Jake!

Joseph

***Jake*** · #4 January 19th, 2009, 01:39 AM

Thanks Joseph,

Here's the one for your model you can order:
Manufacturer's Number: 99002825

If you purchase parts from our links here and you install them and it doesn't fix the problem, you have a 30 day full refund when you return them.

Jake

JoeyD · #5 January 19th, 2009, 09:05 AM

I was reading an earlier post where someone else had the same kind of problem with their washer. They found that steam, and water was getting into the control panel. I don't know if that is happening to ours, but I do notice a door gasket that has failed, and water is dripping on to the floor.

Is there a series of gaskets or seals that I can purchase to reseal the machine?

***Jake*** · #6 January 19th, 2009, 10:23 AM

Here's the door gasket for your model you can order:
Manufacturer's Number: 902894

902894

Jake

JoeyD · #7 January 27th, 2009, 10:21 AM

Jake: The parts came in yesterday. Yea!

I was having some problems removing the old control board- I removed the two screws holding it in, and there are a couple plastic clips, but there seems to be something else holding in the control board. Is there a mechanical drawing or a parts list or a instruction manual that shows me how the control board is removed? I guess I could bust it out, but I am nervous that I would break off a tab that holds in the new part.

Joseph

***Jake*** · #8 January 27th, 2009, 10:40 AM

Hi Joseph,

Read section 5 here it will tell you:
http://www.servicematters.com/maytag...s/16021814.pdf
Page 5-24

Jake

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenmore Elite 110.85876400 - Dead Front Panel ?	rvweb	Sears Kenmore	7	July 19th, 2008 01:59 PM
SHU3326 (DLX): Front control panel - How to remove it	INXS9000RPM	Bosch	2	May 20th, 2008 11:08 PM
Maytag Quiet series 300 Control panel	superbond	Maytag/Magic Chef/Admiral/Jenn-Air	2	March 11th, 2008 01:45 PM
Maytag QuietSeries 300 problem - some buttons don't work	Saurav	Maytag/Magic Chef/Admiral/Jenn-Air	3	December 16th, 2007 11:12 PM
maytag range does not work	DavidMedford	Maytag/Magic Chef/Admiral/Jenn-Air	7	August 19th, 2007 01:15 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)