Maytag BDM9100AWQ dishwasher that will not work at all. No response if the auto clean button is pressed. I took apart the door and found that 120volts goes to the two micro switches located behind the door latch. Once activated the voltage is routed to the control panel pcb. Measured voltage at pcb input and found it to be 120VAC. Pressing any button on the panel will not do anything. What could be wrong with the circuit? Any clues?
Veej

Hi Veej,

Please double check your model# again, that one doesn't pull up as good.

Sounds like a control panel/control board issue.

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances

Hi Jake,
It is actually MDB9100AWQ.
Veej

Thanks Veej,

Looks like you have a 5 yr. parts warranty on it from Maytag:
http://shared.whirlpoolcorp.com/asse...e/6_915728.pdf

If your serial# starts with 11 or higher, Here's the one for your model:
Manufacturer's Number: 99002825



Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances

Hi Jake,
Do you know where I can get my hands on a schematic for the board?
Thanks,
Veej

Hi Veej,

Unfortunately, Maytag doesn't list it on their site.

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances