Serial number is 37164793LN

I have a Maytag (about 1.5 years old). For a while it has had intermittent problems (the buttons wouldn't respond, but would if you waited 5 or 10 minutes).

As of today, there are NO lights on the control pad and it won't do anything. I have confirmed that it has power. I have checked the door switch with a multimeter and it seems to be functioning properly.

From what I've read in other posts, I'm guessing I'm going to have to purchase a new control pad, but not sure if I need a control board, too or both.

Is there anything else I can be checking before I sink money into this. I would hate to order these parts and find that it's not the problem. Any advice would be most appreciated!

Thanks.

Hi,

It sounds like its just the control panel assembly thats bad.

Remember only on our site can you shop with confidence as all parts ordered from our site come with a 30 day full refund even if it was installed and didn't fix it.

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances

Thanks Glenn,

Here's the tech data sheet for your model, you can actually test the control panel continuity with an ohm meter:
http://www.servicematters.com/maytag...s/16026393.pdf
You can print this out to read it better.

But from all the ones I've changed for this issue, its always been the control panel.

Here's the control panel for your model you can order:
Manufacturer's Number: 6-919821


Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances

Thanks, Jake. I'll check out the manual for some tests and probably end up ordering that part.

-Glenn

Sounds good Glenn, let us know how it goes.

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances