I have a Maytag PAV2300 that is less than 4 years old. It is not spinning properly on heavy loads. The local service guys say this is a common problem and there is nothing that can be done. They also say that the problem stems from the fact that there is not an off balance switch. Has anyone found a way around this? I hate to buy a new washer already. This sounds like a design flaw on Maytag's part, has anyone contacted Maytag?

Penny

Could be several things causing this besides the off-balanced loads, A bad motor pivot/spring, belt worn, thrust bearing going bad.

They did have some snubber problems, white plastic white shavings underneath the washer, so if you see that underneath, thats a major repair.

Here is a link that will explain more about these washers:
http://www.applianceaid.com/norgewash.html

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances