|
|||||||
| Look-Up & Order Appliance Parts | Monthly Newsletter | Shop Home Appliances | Appliance Blog Home | Appliance News |
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
This refrigerator a few weeks ago was getting warm and after reading posts I did the following....
Check coils - all frosted up Check fan - running Forced unit into defrost mode by cycle cold on off 3 times. Heating element got hot. Defrosted coils completely/ with help from hair dryer. Ordered new ADC After a week the new ADC board arrived and I installed it, but coils(and back panel) are starting to frost up and when I try forcing defrost cycle, the heating element doesn't seem to get hot. What next? Did I do something wrong? |
|
#2
|
||||
|
||||
|
You will need to ohm the defrost thermostat while its frosty, to make sure you have continuity, as well as with the heater itself.
Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances |
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Maytag Neptune 8700 repair issues & Maytag Rant. | jazzman_q | Maytag Brands Forum | 14 | May 19th, 2009 11:40 AM |
| Maytag Model MSD2657HEQ fridge side warm | robivi3 | Maytag/Magic Chef/Admiral/Jenn-Air | 5 | June 9th, 2007 03:29 PM |
| Warm then back to normal Maytag Prob | Mikano | Maytag/Magic Chef/Admiral/Jenn-Air | 1 | October 10th, 2006 02:12 AM |
| Maytag Neptune - No spin cycle | fox_1028 | Maytag Brands Forum | 1 | May 24th, 2006 11:15 AM |
| Maytag Wide By Side - Compressor dies after 11 months | pete_nc | Maytag/Magic Chef/Admiral/Jenn-Air | 4 | August 16th, 2005 10:24 AM |