Maytag dual inlet water valve - ApplianceBlog.com

Geraldz · #1 March 3rd, 2007, 05:34 PM

I am installing a water valve for a Maytag MSD 2756GEW and I should have taken some pictures with my digital camera cuz I am confused about which line goes where. Does anyone have a schematic or can take a picture of an installed water valve with which line comes or goes to where?
Thank you in advance.

Geraldz · #2 March 3rd, 2007, 06:47 PM

Quote:

Originally Posted by Geraldz

I am installing a water valve for a Maytag MSD 2756GEW and I should have taken some pictures with my digital camera cuz I am confused about which line goes where. Does anyone have a schematic or can take a picture of an installed water valve with which line comes or goes to where?
Thank you in advance.

If not a schematic, how about some installation tips...?

***Jake*** · #3 March 4th, 2007, 11:48 AM

They make 2 different inlet water valves for your model, please post your serial# of your refrigerator so we can check which valve you have. Thanks.

Here is a wiring diagram for your model:
http://www3.sears.com/imaging/ImageP...&titleID=00012

Jake

Geraldz · #4 March 4th, 2007, 05:35 PM

Thank you for your replay
I have a Maytag side by side, Model MSD 2756GEW, Serial # 10120555ZS.
It seems there is a valve on top of another valve. During the job, I got side tracked and didnt go back til hrs. later. At that time, I was second guessing myself and even forgot which valve the water supply from the wall goes into.
I will take pictures of the valve I am replacing along with the other valve.

***Jake*** · #5 March 5th, 2007, 09:49 AM

Thanks,

Here is the water inlet valve for your model:
Dual water inlet valve kit

and here is your other one:
Dual water inlet valve

Jake

Geraldz · #6 March 5th, 2007, 10:56 AM

I did buy the correct replacement valve. I have enclosed the following pictures. I am hoping that you can point out my mistakes about what goes where...

Geraldz · #7 March 5th, 2007, 11:06 AM

By the way, you will notice that the placement part I used (item# 914955) is the "old" one you pointed out. I guess the new one does away with the Y-Line. Should I return it or go it?

***Jake*** · #8 March 6th, 2007, 11:02 AM

Yes, they had alot of problems with that Y-Line connector, the first part photo link in my post above is the replacement for that one. You should get it.

Good photo's but without me being there with you to see where the lines came off from the original ones, Its impossible to know what line goes where.

Jake

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenmore Coldspot - no water to icemaker	Teppi K	Sears Kenmore	5	April 8th, 2007 11:52 AM
HE3T-faulty water inlet valve?	allroad	Sears Kenmore	3	September 18th, 2006 01:50 PM
Series 90 Water inlet valve help.	djt6607	Sears Kenmore	3	May 31st, 2006 06:09 AM
GE Dual Inlet Valve flooding	ServOwner	GE/Hotpoint	3	September 20th, 2005 12:24 AM
Wiring for Water Valve Maytag	Christine	Maytag/Magic Chef/Admiral/Jenn-Air	6	September 6th, 2005 08:14 AM