July 4th, 2012, 06:53 AM
Thermador range knobs off setting for shut off
More than 10 years
We own a Thermador range that has worked fine. Today - when we went to shut off the gas burner, the knob would not go to the off setting. my wife turned it counterclockwise past low, and then tried to go to the off position. it stoped at "hi" and shut off there, it is acting like hi is off now. any idea on how to re adjsut these knobs?
July 4th, 2012, 08:42 AM
-Sounds- more like the knob cracked/broke.....JMO!
Pull it off and have a peek.
July 4th, 2012, 09:35 AM
Thanks Jeff - sorry for being such a novice about this, I tried had tried pulling the knob off, but there was some resistance so I thought it might be attached other than with a knurl. do those knobs just pop off?
July 4th, 2012, 07:32 PM
The model# won't come up for me ( many need the serial # as well ) but I found these...
Burner control knob. Matte black. 1-3/4 inches in diameter. "D" shaped shaft Manufacturer Number 415364
Knob Manufacturer Number 415365
...and these will just pull off towards you.
By stevencg in forum Ranges/Ovens
Last Post: January 30th, 2012, 12:19 PM
By KEN PENUEL in forum Ranges/Ovens
Last Post: January 4th, 2012, 03:36 AM
By swebeaux in forum Ranges/Ovens
Last Post: September 29th, 2011, 09:07 PM
By 91030Mom in forum Ranges/Ovens
Last Post: March 17th, 2009, 07:00 PM
By larry harding in forum Whirlpool/Roper
Last Post: January 29th, 2006, 04:52 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!