Hi all,
The washer is 22 years old, model number 110.82671810. Every time it goes into spin cycle, it's as though the load were out of balance. It walks all over the room. The load has been checked, adjusted, etc. and is not the problem.
What has worn out that's causing this?
Thanks

Either the rear self-stabilizing legs are not correct or the suspension plate is out of place or the suspension pads are worn out.

First lift your washer from the back and see if the rear self-stabilizing legs reset.

Jeff explains it very well here:
my washer moves around, my washer wobbles, my washer vibrates, and how to fix this, common suspension problem on a direct drive washer, whirlpool, Inglis, Kenmore

Read #2 here to remove the cabinet:
how to access a direct drive washer, pump repair, motor repair, replacing the motor coupler, intalling the cabinate, removing the cabinate, Whirlpool, Inlgis, Kenmore, washers

Jake

__________________
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present

If you need more repair advice help on your appliance, click Here

Look-Up & Order Parts

Shop Home Appliances