May 31st, 2010, 04:46 PM
Whirlpool refrigerator condensor motor is not working.
I need help. My condensor motor is not running and my refrigerator panel are geting hot. I put a small fan bihind the refrigerator now the temperature inside the frezer is 0 and 37 degree. I opend the back of my refrigerator and checked the power to Motor. It is showing 120v before i connect the supply to motor but when I connet the motor wire it donesn't run and power supply reading becomes zeroes. I don't know whether the motor is the problem or the motherboard. Please help.
May 31st, 2010, 06:37 PM
Yes then it is the control board, not the fan motor.
This other member had the same issue here:
[FIXED] Whirlpool GC3SHEXNQ00
And the new control board fixed it.
You will need the compressor control board assembly, it sends power to the condenser fan motor:
Manufacturer part number 2307028 is RepairClinic item number 1058823
Its #19 here:
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present
Look-Up & Order Parts
By greghoe in forum Whirlpool/Roper
Last Post: December 8th, 2009, 09:15 PM
By slrourke in forum Whirlpool/Roper/Estate
Last Post: September 30th, 2008, 10:26 AM
By b29d23r24 in forum Whirlpool/Roper/Estate
Last Post: July 24th, 2007, 11:16 PM
By bclampff in forum Whirlpool/Roper/Estate
Last Post: March 13th, 2007, 10:53 AM
By ysp in forum Whirlpool/Roper
Last Post: January 31st, 2007, 06:39 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!