July 4th, 2011, 04:32 PM
SHE4AM15UC/03 won't start, blinking "Regular Wash"
Guys... I'm at a loss here...
Just discovered that my SHE4AM15UC/03 just blinks "Rgular Wash" and does not start the cycle when I press "Start". To be more specific, none of the buttons work, except for power. I can not switch program or do anything. Tried reset, tried circuit breaker...
What I figured that if I hold both "arrow" buttons down and switch it on, It gets into some kind of a diagnostic mode but I am not able to tell the problem from there as I don't know the "blinking light" codes. It has no LCD display...
I must add that we had a lightning hitting our block before it started happening... I lost a computer. Neighbors lost stuff too... I don't know if it's related or not.
Guys, help! My wife is away and she's gonna kill me when she gets back and finds her dishwasher dead Eeeee....
July 5th, 2011, 08:25 PM
July 6th, 2011, 05:16 AM
My code is blinking sanitized alone which is not listed as a valid code in the manual ;-( The closes one is the lit sanitized, which would then mean it's the power/control module.
I guess I have to cash out and call a tech...
July 6th, 2011, 06:15 AM
If you get a chance, let us know what he/she finds.
July 21st, 2011, 07:15 PM
It was the power/control module. That white box with lots of colored wires on the bottom.
July 21st, 2011, 09:39 PM
Thankx for the update, that can help others!
By cedric in forum Maytag/Magic Chef/Admiral/Jenn-Air
Last Post: June 27th, 2011, 11:26 PM
By harpman316 in forum Whirlpool/Roper/Estate
Last Post: February 14th, 2008, 05:03 PM
By threekranes in forum KitchenAid
Last Post: September 24th, 2007, 09:56 AM
By grausshoppa in forum Whirlpool/Roper/Estate
Last Post: June 30th, 2006, 11:35 AM
By pbatt in forum Maytag/Magic Chef/Admiral/Jenn-Air
Last Post: January 26th, 2006, 01:26 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!