December 16th, 2004, 03:42 PM
I have seen lots of posts around many websites regarding early life failures of bearings on these front load washers.
I thought I would put a post here to a forum on the gardenweb.com site that has a thread going from a guy who is a specialist from a bearing company that took it upon himself to source and replace the bearings instead of buying a entire rear drumhole new drum.
May not be of much interest for the pro appliance repair guys, but there are many homeowners that may want to tackle this job instead of scrapping the whole washer.
check it out......
Very interesting reading.
December 16th, 2004, 08:08 PM
Thanks for posting that link, lots of people here would love to read that.
Appliance Repair School 1987-1988
Star Appliance Tech. 2 yrs. 1988-1990
Wards Appliance Tech. 11 yrs. 1990-2001
Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
Jake's Appliance Repair Nov. 2005-present
Look-Up & Order Parts
By citizengeek in forum Sears Kenmore
Last Post: April 14th, 2008, 02:04 PM
By sky_can in forum Sears Kenmore
Last Post: January 3rd, 2006, 01:29 PM
By erme in forum Frigidaire/Electrolux
Last Post: September 11th, 2005, 08:09 AM
By nworker in forum Washers
Last Post: August 29th, 2005, 10:40 PM
By chedo in forum Sears Kenmore
Last Post: April 11th, 2005, 08:19 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!