|
|||||||
| Look-Up & Order Appliance Parts | Monthly Newsletter | Shop Home Appliances | Appliance Blog Home | Appliance News |
| Washers Problems with your Washer? |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
September 12th, 2006, 07:26 PM
|
|||
|
|||
Roper no spin or agitation
I own a Roper washing machine that is at least 15 years old. It is a 2-spead large capacity washer. It stopped agitating and spinning. I assume this is a belt problem but I was wondering is there are any tips to diagnosing this. I've never tried to fix a washer before.
thanks in advance. John 
|
|
#2
September 12th, 2006, 09:36 PM
|
||||
|
||||
|
G'day,
Model#? Most ( not all ) Roper washers will not have a belt. See if the motor coupler is broken ( if like your mystery model ). http://www.applianceaid.com/procedures.html jeff.
__________________
http://www.applianceaid.com/ Appliance Repair Aid http://www.jrappliance.ca JRAppliance
|
|
#3
September 13th, 2006, 05:25 AM
|
|||
|
|||
|
Hey Jeff,
Thanks for the speedy reply! On the back of the washer I found this information: 3352223 Stolle Is that the model number? Also, if its the connector my inclination is to buy a new washer. My assumption is that a belt is easier to tighten or replace than a connector. thanks, John
|
|
#4
September 13th, 2006, 06:08 AM
|
||||
|
||||
|
Model# -normally- is not on the back.
http://www.applianceaid.com/model.html Quote:
Changing a belt on a KitchenAid, Inglis, Roper, Whirlpool washer was much worse than changing a motor coupler!! Tightening a belt would be the easiest of all 3 jobs. jeff.
__________________
http://www.applianceaid.com/ Appliance Repair Aid http://www.jrappliance.ca JRAppliance
|
|
#5
September 13th, 2006, 01:42 PM
|
|||
|
|||
|
The part number is:
AL6245v it may be AI6245V the number was stamped on a line so its hard for me to tell if its an "L" or an "I" Is there a description of the proceedure and is it very difficult? thanks again, John
|
|
#6
September 13th, 2006, 02:26 PM
|
||||
|
||||
|
Quote:
Quote:
 http://www.applianceaid.com/procedures.html  Quote:
 jeff.
__________________
http://www.applianceaid.com/ Appliance Repair Aid http://www.jrappliance.ca JRAppliance
|
|
#7
September 13th, 2006, 03:09 PM
|
|||
|
|||
|
Hey Jeff,
I could be missing something in the instructions, but they seem to jump from removing the cabinet to being able to access, or at least check, the motor coupling. How do I get to it when the canister/drum is sitting on everything. thanks, John
|
|
#8
September 13th, 2006, 03:19 PM
|
|||
|
|||
|
Hey Jeff,
I figured it out -- detached the pump and the motor, and am now holding a worn-smooth coupler. Now I just need a new one. John
|
|
#9
September 13th, 2006, 09:21 PM
|
||||
|
||||
|
Glad you got to the trouble maker
jeff.
__________________
http://www.applianceaid.com/ Appliance Repair Aid http://www.jrappliance.ca JRAppliance
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Knocking during end of spin cycle | soggypants | Direct Drive Washers | 7 | June 12th, 2007 09:13 PM |
| No Agitation or Spin, but drains Kenmore 110.92093120 | Jack115 | Sears Kenmore | 3 | February 20th, 2007 12:27 AM |
| Neptune 9700 Spin Cycle problem | DanO | Maytag/Magic Chef/Admiral/Jenn-Air | 1 | August 29th, 2006 12:09 PM |
| GE WSXH208A 1WW / no spin or agitation | johnstmk | GE/Hotpoint | 4 | August 10th, 2006 11:03 AM |
| 110-92582110 won't spin | jedd | Sears Kenmore | 3 | September 28th, 2005 10:51 PM |
Linear Mode
