|
|||||||
 |
|
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
February 8th, 2010, 10:05 AM
|
|||
|
|||
Light and LED in Whirlpool side by side
He replaced the board, and it was burnt around #90, just like everything I read said it would be. Before he replaced the board, the fridge was making a nasty electrical noise whenever the door was opened (started when the lights went out). The new board stopped the noise, but the lights/LED still didn't work. He ordered the part to replace the light and LED assembly. He delivered that today, installed it, and it still didn't work. He said he didn't know how to fix it, so he took his new light assembly out, put the old one back and left. I have another company coming out later this week, what should they be looking for? Could the wrong or improperly installed control board be causing this? It's cooling fine, and the lights in the freezer are working fine. Last edited by Mikebud; February 8th, 2010 at 10:07 AM. 
|
|
#2
February 8th, 2010, 11:11 AM
|
||||
|
||||
Thats odd, that board should of fixed it.
Here's the control board for your model: Manufacturer's Number: W10135090 Is this the one the tech. installed? Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances
|
|
#3
February 8th, 2010, 12:20 PM
|
|||
|
|||
|
I never saw what he put in.
The box indicates it is the right number. Any chance it was just installed wrong?
He also said that he thinks I may have had some wiring damaged in between the board and the light assembly when it blew? The guy seemed very inexperienced, and I'm hoping for something easier than burned wires buried in that insulation! Last edited by Mikebud; February 8th, 2010 at 12:31 PM.
|
|
#4
February 8th, 2010, 04:30 PM
|
||||
|
||||
|
Yes, well you need to get him back out, or another tech. from the company you called, they should have at least a 30 day warranty on all work thats done.
Jake
__________________
Appliance Repair School 1987-1988 Star Appliance Tech. 2 yrs. 1988-1990 Wards Appliance Tech. 11 yrs. 1990-2001 Sears Appliance Tech. 4 yrs. 2001-Oct. 2005 Jake's Appliance Repair Nov. 2005-present If you need more repair advice help on your appliance, click Here Look-Up & Order Parts Shop Home Appliances
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FIXED] Whirlpool Conquest LED Control Panel and Lights Out | jaboobie | Whirlpool | 5 | December 29th, 2009 04:38 PM |
| [FIXED] Whirlpool Quiet partner III Model# GU2400XTPT3 Cleaning light blinking 7 times | piratedv | Whirlpool | 5 | January 25th, 2009 07:31 PM |
| [FIXED] Whirlpool GU2600XTPS1 clean LED flashing 7 time's | chavezone | Whirlpool | 25 | December 19th, 2008 08:36 AM |
| Kenmore Elite 665.17572202 Troubleshooting Help Please | ando1 | Sears Kenmore | 7 | May 23rd, 2008 10:37 AM |
| Whirlpool "Gold" side by side light blinking | tbone7244 | Whirlpool | 7 | August 6th, 2007 10:15 AM |
Linear Mode
