I went out on this service call and found the oven ignitor glow bar was not turning on to light the gas. I checked for 120 volts at the oven ignitor glow bar electrical connector with the oven on and set to bake at 350 degrees, I had no voltage at all to it.
I ordered the clock oven control board and replaced it, and that fixed it, works great!
Its very easy to replace, just pull the range out from the wall, then unplug it, then remove the back console access panel, then remove the clock oven control board by removing the 4 screws, then remove the overlay on the old one and put it in the exact same place as the new one and your all set.
Here’s the clock oven control board for this model:
316455430 Clock/timer
Jake
Western Arizona Forecast
Today
Sunny and hot. Highs 103 to 108. East wind 5 to 10 mph in the morning becoming southwest in the afternoon.
Tonight
Clear. Lows 71 to 81. West wind 5 to 10 mph in the evening becoming northwest around 5 mph after midnight.
Saturday
Sunny and hot. Highs 103 to 108. South wind 5 to 15 mph.
