More Activity

5 Visitor Messages

  1. View Conversation
    Not overly common for off-balanced unless customer uses smaller loads or mixes loads ( 1 heavy item with a bunch of light ones ).
    Usually just make noises and doesn't damage the springs.

  2. Hi Jeff thanks. Just trying to get use to granny's machine. Caught it banging again today with the blankets and it actually moved the machine a little. Are the bases pretty strong on this and the outer tub to withstand that banging. And what's banging on the sides anyway? Just the tub? What damage can occur if ever any?
  3. View Conversation
    Not normally...odd time the WLC hose can get pulled off, can bang against the lid switch and damage it, can pull the wires off of the lid switch.

  4. <iframe width="420" height="315" src="" frameborder="0" allowfullscreen></iframe> Can you see this? I took it last night. Just getting second opinions. Doesn't happen all the time. And doesn't happen through spin just when the cycle clicks off an the tub is coming to a stop I hear a slight whine like its whining down.
  5. View Conversation
    Brake, clutch, tub drive block would definetly be prime suspects.
Showing Visitor Messages 1 to 5 of 5
About warrenkeller

Basic Information

Date of Birth
April 26, 1984 (35)
About warrenkeller


Total Posts
Total Posts
Posts Per Day
Visitor Messages
Total Messages
Most Recent Message
November 13th, 2012 08:06 AM
General Information
Last Activity
January 11th, 2013 10:38 PM
Join Date
January 4th, 2011

2 Friends

  1. Jake Jake is offline

    Appliance Tech - Admin

  2. jeff1 jeff1 is offline

    Appliance Tech - Moderator

Showing Friends 1 to 2 of 2
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!