Tab Content
  • Justin568's Avatar
    November 10th, 2018, 07:35 AM
    It was more so consistently between 35 and 47. If I wiggle the probes in the slightest is when I would see a spike, to above 300+ but if holding...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 9th, 2018, 08:36 PM
    That looks very similar to mine and getting very comparable ohm readings. What ended up rig the issue In this case? Was the element bad?
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 8th, 2018, 08:26 AM
    I donít see one with my dryer. Is there supposed to be one in a certain location? The only thing I saw was for the wiring of the plug into the back...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 7th, 2018, 05:46 PM
    Hey Jeff, Sorry for the delay, I have been looking for a wiring diagram online but can not find one for my perticular model. Do you have any idea...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 4th, 2018, 07:04 AM
    Thanks again Jeff! just wanted to clear some things up before I attempt this. What specific type wire and gauge should I use to create the...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 3rd, 2018, 06:35 AM
    Hi Jeff! I am mostly learning as I go so I will have to see if I am able to figure out how to test the element while the dryer is running. I am...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 2nd, 2018, 07:06 AM
    Hi Jeff, thanks for the reply again. So I had already had it all apart and tested each component separately. One coil was black but it was the one...
    17 replies | 464 view(s)
  • Justin568's Avatar
    November 1st, 2018, 02:37 PM
    Hi Jeff! The model I have is actually DV42H5600EP/AC (it's from Canada) Dryer assy that is required for replacement is part number DC93-00154A...
    17 replies | 464 view(s)
No More Results
About Justin568

Basic Information

About Justin568
Location:
Nova Scotia

Statistics


Total Posts
Total Posts
9
Posts Per Day
0.47
General Information
Last Activity
November 12th, 2018 09:16 AM
Join Date
November 1st, 2018
Referrals
0
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!