affinity

I’m sorry if this has already been answered in a previous thread, but I could use help. I’ve googled my eyeballs out of my head trying to fix this dryer, to no avail. Frigidaire Affinity model #AEQ6700FE0 made on 09/07. Won’t heat at all. I’ve replaced the heating element along with thermostat...

Hello, When I purchased this house, it had this Frigidaire Affinity front loading washer. It always ran well other than it wouldn't dispense soap and bleach properly, probably due to hard water build=up blocking the jets which is how I assume it works. A couple years ago, when prompted to run...

I have a Frigidaire Affinity front loader I am giving to my mother in law, just replaced. But the thing feels like it weighs 400 pounds because it is full of water. Plenty of videos on draining when the hose is on the bottom but nothing with the drain hose on the top. How do I drain this...

A few weeks back my Affinity front load washer would stop mid-cycle. Sometimes I could re-start it and it would complete, but then it stopped completely. The initial error code went back and forth between E6E and E41. Here are the steps I took- 1. Checked drain and pump -> nothing clogging it...

Our washer recently stopped working. My wife had been using it in spin only mode when it stopped working. It then would allow the door to lock shut and the time would count down but would not spin. I tested it in other modes but it did the same thing. I ran the diagnostic and got an E56...

Hi all, I have a Fridgidaire Affinity Dryer FASE7073LW0 that was originally getting error code 64 I believe. I replaced the heating element (old one did have broken coils), put it all back together, then got E61 error after running for only a few minutes. Tried to do some research and found it...

Im at my wits end with my dryer! I got it from a guy on Craigslist for cheap cause the control board needed replacing (power surge burnt the board) I replaced it and it started up got hot a spun for about 2 min beeped once and displayed PAU. I checked the codes and it said E8C I've...

I just bought a used Frigidaire Affinity washer (ATF6000FS2) and dryer that are four years old. They worked fine when I bought them. The issue I am having is that the cold water will not pump into the tub and the machine seems to be pausing during cycles, during what I suspect when the cold...

My Frigidaire dryer as started to make a "rumble". The clothes are still drying fine. Any Ideas? http://youtu.be/9q0oyuWyiLE

Hello Everyone, I am really glad to have found this thread. Before I go and buy another washer, I wanted to see if it was something I could fix. On Saturday, out of the blue, we heard our washer just beep on and off on its own. The only way to make it stop was to unplug it. It doesn't come...

Hello, I am having a problem with my Frigidaire affinity dryer. My dryer is electric and NOT gas. The model number is (FAQE7011KW0). The dryer is about 27 months old and I've never had a problem with the dryer. Yesterday, my wife and I realized the dryer was not heating up. The dyer will turn...