bearings

  1. T

    WFW70HEBW0 Replace Washer Bearings? Which Ones?

    Hello everyone, I need help determining which part I should replace. I have a Whirlpool Duet Washer (WFW70HEBW0) that makes a terrible noise during the spin cycle. It still works fine, but it sounds like the washer is going to go through the wall! I attached a link to an audio clip so you can...
  2. L

    FIXED Samsung Washer WF42H5600AW New Bearings & Shocks but Washer Still Makes Racket During Spin Cycle

    Samsung WF42H5600AW/A2 mfd: April 2014 Issue: Despite new bearings and shocks, washer continues to make a loud noise during spin cycle. For months, our washer makes an awful racket during the spin cycle and had a small leak. I disassembled the washer and discovered that half of the lower...
  3. N

    FIXED Maytag Bravos Washer MVWB880BW0 - Loud Spin Cycle (Bearings?)

    Hello, I have an 8 year old Maytag Bravos washing machine (MVWB880BW0) and it recently starting making a loud noise during the spin cycle. The noise gets louder the faster it spins. Everything else works as it should and the machine still does a good job washing clothes. I've researched this...
  4. lamune

    FIXED WFW9600T Whirlpool Washer sounds like a train when spinning

    Over the last year or so this old washer has been getting really loud. Now that we're home more I really notice it. It sounds like a train rolling by along with a metallic clatter that says something is clearly wrong. I can also lift the inner drum and move it about an inch. I'm guessing the...
  5. J

    Whirlpool Cabrio Shaft/ Bearing Replacement

    Hello Experts, I am out of options. I am on day two of this project and have one last hurdle I cannot figure out. As far as the youtube videos go i have done everything correctly. HOWEVER, when put the basket back in and try to install the "drive nuts" between the shaft and basket there is about...
  6. T

    Kenmore 80 series basket not spinning - bad basket drive?

    Hello, First of all, thank you for having such a wonderful forum. This is the best source of information I have found so far in trying to triage my washing machine. Problem: Washing machine basket does not spin - Kenmore 80 series. The agitators work fine,but the basket does not. During spin...
  7. H

    WTW6600SW1 Whirlpool Cabrio General questions about rotor and stators

    Hi All - Appreciate the help with improving my mechanical skills! First some background info, In the beginning, I gathered up at least 2 spare Cabrio WTW6600SW1 washers as they were unfixable for many, and they were selling them for either nothing or like $50. I stripped one and kept one in...
  8. Z

    Maytag MAH6700AWW bad tub bearing

    I have a Maytag MAH6700AWW, which I believe was made in a Samsung facility and is similar to the MAH8700AWW. The tub bearing has failed. I am having trouble finding parts. It appears that the manufacturer had people replace the rear outer tub, similar to how the traditional Neptune bearings...
  9. C

    FIXED Kenmore Washer 796.40318900 loud spin

    Washer makes loud noise when in spin cycle. When the washer was empty I manually rotated the drum. Sounded like like dry bearing rolling around. Definitely not smooth. I read the manual about the lifetime warranty for the drum. But it didn't specifically the drum with the bearings. Do you know...
  10. D

    WM3470HWA LG FL rear tub seal leaks

    Hi, all. While I've generally and otherwise liked the two LG front-load washers I've owned (the first, a WM2277, and the more recent, a WM3470), both of them had (2277)/have (3470) developed a rear tub seal leak. I replaced the seal and bearings in the 2277, and eventually replaced with the...
  11. P

    MVWX500XW2 Maytag Washer Loud noise when spinning

    Our Maytag Bravos washer began making a loud noise when spinning a few months ago. I did a little research online and figured it was the bearings that had gone bad. Well, it turns out that this washing machine is not built like anything else out their, so the videos I've found are of no help...
  12. R

    Sounds like metal or rocks on fast spin

    We have had our 24" front-loading Maytag for about 10 years. I think the model came out around 2004 (manual has this date copy-writed). It has worked well, with only one problem, about a year ago (a board went out, repaired by a service tech). Recently it started to make this terrible...
  13. D

    Possible to lube noisy circulation pump on dishwasher?

    Hello, I have a Frigidaire dishwasher, model FGHD2433KF1. Sometimes it sounds like the pump has grinding (and occasionally squealing) bearings (noise definitely from the circulation pump, not elsewhere). Sometimes these pumps have a noise caused by the whirling garbage disposal chopper blade...
  14. J

    making a scraping/grinding noise

    My trusty dryer started making a scraping/grinding noise (hard to describe but more scraping less grinding) in the last few days. Is this the bearings or motor or something else? Coincidentally (maybe not?) my GFI wall plug also seems to have gone bad - maybe due to a heavier than normal...
  15. M

    FIXED Kenmore rattle noise in rinse cycle

    This just started happening. It sounds like a dry bearing rattle when the water is being drained out of the wash cycle, and once it starts spinning, a quieter version. I need to diagnose better, and saw other posts that said maybe lint or something may be stuck in the washer pump. I took off...
  16. R

    Could a Kenmore Elite front load washer broken part fall into the drain pipe and block the pump?

    The main question is whether water in the tub (because of a failure to drain) would or could cause the drum to smack around while on spin. For 6 months, I've been staring at my semi-dead washer, unable to muster the will to move it out of the washer closet (it is stacked with a dryer) and remove...
  17. S

    Kenmore 417.43042200. with oil leak

    :confused: The original thread was a little cufusing I just want to confirm. It looks like I have the same problem Kenmore 417.43042200. with oil leak into the clothes and minor aluminum tri-arm rust ( that can be cleaned out). I already took my washer apart, down to the tubs and stainless...

Support Our Site

If you feel that you have benefited from this site, and would like to show your appreciation, please consider making a donation.

Back
Top