control board

  1. R

    GSC25C4EYY02 Whirlpool Gold 2012, Ice maker no dispense, not the auger motor

    Hi, Parts for Whirlpool GSC25C4EYY02 Refrigerator The Ice Maker quit dispensing ice. The water works, other functions seem normal (except having trouble with food freezing top shelf of refrig). Replaced the auger motor, no love. Attempted to measure voltage at auger motor plug/connector...
  2. T

    Display only lights up with 8's

    I have a Whirlpool refrigerator, model # GI5FSAXVY02 After turning off and on the main breaker in my home, I noticed that my refrigerator display was not lit up like it always is. The refrigerator moter is not working, though power is going to the unit. When I press any button on the display...
  3. F

    Not washing

    Hello all, I bought this Kitchenaid KDTM354DSS last summer. So far it's worked like a champ. Now, it won't pump water up to the jets. It will fill, heat the water up and drain correctly, just not wash. I cleaned the little bit of gunk out of wherever I could find, but now I'm unsure how to...
  4. R

    WDT710PAYB5 All LEDs light up when doing 1-2-3 diagnostics

    Our fairly new Whirlpool dishwasher stopped working a couple of weeks ago and we've been trying to pinpoint the issue. When we run the 1-2-3 diagnostics, all of the buttons light up and stay lit. Does it sound like the control board? She would get any additional parts while we're at it just in...
  5. H

    Stand alone freezer temp inconsistent

    We have a Upright Frigidaire FFU14F5HWB freezer that is having a problem maintaining a consistent temperature. We had a previous problem with it where it would just stop working and get weird readouts on the control board panel. This was initially resolved by unplugging and plugging the freezer...
  6. S

    Evaporator fan keeps cycling on and off.

    I have a Kenmore side by side with icemaker and water dispenser. My evaporator fan on startup cycles on and off many times before it will stay on and keep running. It does not matter if the compressor is starting or not. I have seen many posts about this problem with my brand and others but no...
  7. E

    Replacing Main Control Board

    New Member, Just found this site, a couple of weeks too late. Hello to all and thanks for the site, Jake. Kitchenaid Model KSFS25FJBT01 - Repairman diagnosed a faulty main control board (2203076) then wanted my dog plus too many $$$$$ to purchase and install. He presented me with the faulty...
  8. M

    Kenmore Range 665.95172300 - New keypad installation problem?

    The main oven stopped working and the keypad was making funny clicks. Upon inspection I noticed that a part of the control board was broken off. Considering the cost, I replaced with a "refurbished" board. Installed the new board. Some of the buttons on the keypad did not work. Error codes...
  9. P

    KitchenAid Dishwasher Resistor Blown

    I got a KitchenAid Dishwasher, dont know how old it is, but its model # is KUDG25SHWH1. Opening it up, the control panel has visible burned resistors, R28 and R32. Does anyone know what would cause these resistors to over stress? I would rather not buy a $60 control panel if it will burn...
  10. E

    FIXED KFIS20XVMS8 Programming control board - PEO 000

    HEELLPPP Hi all, I have just replaced my control board for a Kitchen Aid fridge. The display is reading PEO 000. Now I understand this is where you are supposed to put the code in that is located on the inside of the fridge. The problem is, is that no matter what I do I can't make any progress...
  11. H

    Fridge not coming on

    We recently got my moms old fridge from when she passed. It got very, very dirty from old food. I managed to clean it out pretty good. The thing would not come on. I checked the compressor, and the relay in the back, and both seem good from the tests I have seen online. But, I could still...
  12. R

    Frigidaire washer machine keeps beeping constantly and the lights keeps blinking

    Hi, Yesterday, my washer just suddenly start beeping constantly and flashing light (on warm, Hot/cold and Door lock). So I unplugged the washer and this morning I plugged back, and the washer seems to be fine but after I finish my laundry, my washer started to beep again. But somehow it stops...
  13. D

    GSS23QGTABB - Freezer not cooling, display off, clicking noise

    We had a power outage today. When the power came back on the refrigerator started acting up. It was on all day but when I came back from work, no water being dispensed, no lights were on the the front, pressing buttons didn't do anything, lights inside were on however the cooling was either...
  14. K

    MDB7601AWB Maytag Control Panel & Door Latch Replaced - Start Button Not Working - Display Acting Up

    MDB7601AWB Maytag Control Panel & Door Latch Replaced - Start Button Not Working - Display Acting Up I found information on this forum about how to replace the Control Panel, how to silicone seal the openings to avoid corrosion issues in the future as well as how to replace the door latch. I...
  15. B

    Kitchenaid Gas stove burners work, element in oven works, but not gas cooking or broiling

    I am new to this site but would appreciate help for non tech person. My KA oven recently stopped hitting its temperature, it appears only the oven element is working. There are no error codes, the oven displays preheat, and then reaches about 250 degrees max on the display. No gas sound. No...
  16. S

    Kenmore Elite HE4 110.85088400 - DEAD?

    Our dryer has for about the last month beeped on its own while the lights on the end of cycle signal change. This was occurring when in a cycle and when not (very annoying at night). The display now shows, dimly, 2 lines and some of the lights randomly light up, it will not run, and the interior...
  17. T

    MDBH965AWW Blinking lights: control panel or control board?

    Hi a couple weeks ago we had a power outage and coincidentally, the control panel on our Maytag Quiet Series 300 stopped working. The "Rinse Only" and "Washing Lights" continuously blink, and the display either blinks "9" or "2H." If you press any of the buttons on the control panel nothing...
  18. S

    Kenmore Elite Dishwasher - multiple escalating problems resulting in non-working status

    I'm a detail person (sorry), so this is a detailed run-down of my dishwasher's issue (see the numbered steps below to see symptoms & actions taken): HISTORY/BACKGROUND: Dishwasher is 6 years old this month – Great machine! I have a functioning water softener, and use only Cascade powder...
  19. R

    Frigidaire GLTF2940ES2 No Spin

    I have a Frigidaire gallery washer that works fine on everything but won't spin. I ran the diagnostic two days ago and on test 7 (drain and spin) using the tech diagnostic sheet it returns EF43 (bad control board) and then went ahead and spun anyway. I replaced the control board (not the same...
  20. K

    Diffuser & control board question

    I have a Kenmore Elite Coldspot, model 106.52292100. The diffuser has been making ticking sounds for many months now, but everything has been cooling just fine - in fact, too much so in the refrigerator part. Sometimes (but not always) things on the top shelf will freeze. However, there is a...
Top