controller

  1. C

    MDG5500AWW Maytag Dryer control panel unresponsive - I need some advice

    I have an old Maytag Neptune MDG5500AWW gas dryer (2003) Serial number:62774313CG . The dryer started to beep and the front of the panel was suddenly unresponsive after working flawlessly for 17 years. The lights were on however, nothing changed when I touched the buttons. There was no error...
  2. B

    AO Smith ECT80 210 Unit Keeps Tripping

    Hello! My AO Smith ECT80 210 unit itself keeps tripping. Almost daily I have to push the red button on the controller to start it up again. I've double checked the connections and they all seem good. I even slightly tightened one. I also lowered the temperature, which seemed to have been hotter...
  3. D

    Bosch SHI66U05/14 New Controller All Over The Place

    I have replaced the circulation pump, heater unit and finally the controller in a 16 year old dishwasher. The old controller had a burnt relay and the new one got all the motors running again. The only issue is that the timer on the regular cycle jumps all over the place. Last time I tried it...
  4. C

    Kitchenaid KEDC205BBL1 bake element doesn't heat up

    I have a Kitchenaid KEDC205BBL1 drop-in oven that will no longer bake properly. Broiler works fine. I checked voltage at the bake element - 0 VAC. I checked continuity on the bake element and had continuity and no short to jacket. Element looks to be in fine shape. It appears that the...
  5. L

    LCE3610SB No Response from LG Glass Cooktop Controls

    Cooked top worked Sunday morning (for bacon, eggs and pancakes). Come lunch time, no response from control panel. Cleaned it thoroughly to ensure it wasn't a contact/conduction issue. The panel doesn't even go through reset cycle when the breaker is toggled. There is power at the whip wires. I...
  6. D

    FIXED RF30HBEDBSR Flexzone Control won't change

    Hey there - was searching around for Flexzone drawer issues and found the threads about it freezing, but I have a different problem. I have a Samsung RF30HBEDBSR with the middle Flexzone drawer. It's almost 3 years old and recently the flexzone controller (the button that lets you choose...
  7. J

    Maytag MDB8949SAW0 Control Board Burnt

    Hi, I'm wondering if anyone has any insight. We have a Maytag dishwasher and smelled a burning smell. I opened the door and noticed wires going to the control board were burned. Opening the controller it was obvious that part of it was damaged. They appear to be relays that drive a motor...
  8. C

    FPHD2491KF0 not draining - pump works

    Our Frigidaire Professional series FPHD2491KF0 dishwasher has decided that it does not want to drain any longer. What I've done so far: - checked the drain line and there is no obstruction. - tested the drain pump and it runs fine when connected to 120v. - drain pump impeller is clean, as is...
  9. L

    Bake element not working. Thermostat or Controller board?

    I own a frigidaire professional series built-in oven model CPEB30S9FC1 that is approximately 7 years old. A few weeks ago while cooking pizza at 400 degrees smoke started coming out of the oven after 20 minutes and the oven started to give out a continuous beep and the control panel showed me...
  10. R

    FIXED GE Motherboard woes, fridge not cooling, howling fan, bad ice/water dispensers

    Our 12 year old PSS26MGPAWW stopped cooling recently and required a "kick in the side" to start back up (actually tapping it in the back in various places). Since the coolness settings were 9 and 9, once it started up, it stayed on for a very long time and all seemed well until it stopped...
  11. artminds

    Leak from floor level left side / Normal cycle doens't start

    My 82 year old mother's dishwasher started leaking yesterday, with water appearing on the floor in front of the left side of the dishwasher (about a cup of water total). Have been using the LIGHT/CHINA cycle only, since the NORMAL cycle stopped working about 6 months ago (we always rinse dishes...
  12. F

    Washer does everything except SPIN.

    I have a Frigidaire FWT647GHS1, getting to be about 10 years old. The washer fills, drains and runs through a normal cycle but the drum no longer spins. I have opened the top and rear. The belt is in fine condition. The main drum spins freely with no sign of resistance or a bad bearing. The...
Top