defroster

  1. halfstep

    PSC23NGSBBB suspected defrost issue

    Trying to diagnose the problem. First question, what is the accepted temp range of the freezer set at 0? Is it abnormal to get to 20s? I would imagine so. I've been following some helpful youtube guides to diagnose some of the parts of the freezer. and follow up website...
  2. T

    Kenmore Coldspot Not Defrosting Properly

    Hello, I have an old Sears/Kenmore Coldspot refrigerator that serves primarily as a beer fridge and lives in my garage. Lately it has not been cooling properly. I've done some troubleshooting and found a few things: Thick frost is building up in the back of the freezer on the evaporator...
  3. R

    Ice tray defroster

    The water tray that leads to the ice tray keeps freezing up. When I defrost the freezer, the ice dispenser starts working again just fine until the tube gets frozen again. Is there a defroster in the ice tray that's supposed to keep this from happening? I wanted to get any advice before I...
  4. S

    795.75199401 Kenmore Elite, "Er dH" code. Where's the defrost sensor and temperature fuse?

    I have a Kenmore Elite refrigerator, model 795.75199401. It's a french door with the freezer on the bottom. The digital panel on the front shows error code "Er dH". About 2 weeks after the error code showed up, the refridgerator stopped cooling. The freezer continued to work. I took the...
  5. F

    Defroster Heater Burned Off - Again

    The left wire connection on the bottom defroster heater has burned off for the second time in less than a year. I defrosted the coils and uncovered the issue, re-assembled without reconnecting the heater to get the frozen food back into it! The wiring harness os no longer available. The last...
  6. F

    FIXED Wiring Harness Discontinued - Repair Options?

    Our GE side by side was 'warming up' and there was ice on the rear panel of the freezer. I pulled it off and the coils were frozen solid. </BR> </BR>Emptied and defrosted I found that the upper heaters left side connection had the clear plastic cover melted into a charred chunk, the wire...
Top