door lock

  1. E

    Maytag Bravos XL washer door lock problem MVWB725BW0

    Hello! I have a less than 2 year old Maytag Bravos XL Washing machine. A couple of weeks ago, the DL code would randomly turn on and the door would not lock during the wash, causing my machine not to start washing a load of clothes. After unplugging the machine several times, letting it sit...
  2. I

    KDRP407HSS09 KitchenAid Dual Fuel Oven Buzz

    Good day all, I have a KitchenAid Dual Fuel Range that came with the home. In recent months the oven started buzzing about 5-10 minutes after being turned on. The noise appears to originate just above the oven door, below the range top, and continues for about as long after the oven is turned...
  3. A

    MVWC400XW2 Will the washer spin or agitate if the door will not lock?

    Have a Maytag Centennial CW that will not spin or agitate, noticed that the door lock is not engaging. This is a chicken and egg question, will the door lock prevent the agitate and spin cycles? or would the speed shifter prevent the door from locking? What to replace first or would one...
  4. N

    Front load Maytag won't spin, and now won't agitate

    Newer Maytag, bought when we moved here in mid-2012 started having trouble early 2015. Clothes were intermittently coming out wet as it was failing to spin, drain pump works fine and isn't clogged. Cycles with spin would usually count down to 12 mins remaining, then just end. I inspected the...
  5. M

    FIXED WCVH6260H0WW GE Front-Load Washer Won't Start/Won't go to Service Control Panel

    Hello! I was hoping someone could give me some leads on a problem my washer is having. This washer is newer to me (we purchased it used), so I don't know how it is suppose to sound and work and I'm confused by the symptoms. First, when we start the washer, it makes 6 buzz sounds that are coming...
  6. W

    GHW9400PW0 F11 Error Code and parts replaced.

    I have a 10 year old Whirlpool Duet front loading washer. It has an error code of F11. Replaced the CCU and the Door Lock mechanism. Still has F11 error code. I have had the MCU out of the machine freshened up the contacts on the board and put it back in and still having the error code...
  7. T

    Frigidaire Drain Was Clogged, Fixed... Now I Get E43

    Just over a year old. Was showing E23. Landlord and I laid it on it's side to access the drain assembly where we found two of those color guard sheets stuck in there. We just unscrewed the band holding the rubber gasket type material between the main washer part and the drain pump, and then...
Top