duet

so i found out i had a bad door switch as the pin was busted off and was not sensing the door was closed. replaced the part and i still cannot get the machine to run. holding start will not allow the door to lock and start the process. I have not been able to find anything else that warrants the...

I recently was given a Whirlpool Duet front loading washer and dryer. Now that the dryer is connected to the L.P. propane gas and properly vented, it is working great, however I am wondering if the flame level is normal when I can actually see whisps of the flame behind the top-right grate on...

On last spin cycle the spin got very loud. I thought for sure I'd see something broken, but nothing obvious stands out. I noticed shredded plastic coming out from behind the door boot during spinning. (See picture) Tom

<o:p></o> Trying to find the right pump for my washer. I have determined that the drain pump isfaulty. Where is the best place to find thepump? I have found the entire pumpassembly but I only need the pump. Whirlpool Duet Model GHW9100LW2

Similar to ChicagoChad's post, I am having a problem with my Whirlpool Duet Dryer. When I hit the start button, it clicks once and the sensing light is lit. That is all she will do. Doesn't start to run. I ran through the diagnostic test described in ChicagoChad's post & everything checks out...

Model GGW9200LW1 - DRIVE MOTOR WILL NOT START. I can turn it by hand either way but it wont start. I can hear the relay in the top left click in when the start button is pressed. It beeps once like normal but no start. Ran control panel LED diagnostics and all check out fine. Individual tests of...

I have a Whirlpool Duet Washer Model GHW9150PW3 that I purchased back in 2005 or 2006. During a load a couple weeks ago it stopped suddenly with an F11 error. Now starting any cycle it will F11 error before starting to spin. The first time I try a load after unplugging and plugging in the...

HI, i have the Whirlpool WFW9500TW03 i replaced the MCU and the outlet blows (shorts) when i start the washer i disconected the harnes to the motpor then it wont short do i need a new motor ??? i tested the motor the contnuity reading where fine ???:(

We bought a brand new Whirpool duet about 2 months ago and it's been wonderful thus far. Last weekend, we ended up washing a full pack of gum and maybe some coins in a pair of cargo shorts :eek:. It now sounds as though the coins and debris are rolling within the drum internally. Everytime the...

Hello all, I'm hoping I can get a little diagnostic help so I make sure I buy the right parts Symptoms: Control Panel functions normally and seems to select cycles and options fine. But when I push start I hear a small click, like a relay somewhere on the upper left side. Motor doesn't start at...

First off, props to this forum and website, it has helped me debug my current issue more than I could have imagined with helpful links and pictures. I have a WFW9400SW03 Whirlpool washer that is barely 1.5 years old. I got an F11 error code about two weeks ago and started searching online to...

Hi Gang, Got a nice whirlpool duet steam washer and matching dryer. Picked them up used but never used. Should have bought them new with a warranty! :rolleyes: I know the washer was never used because it still had the shipping bolts and retracted cord in it. It was however moved a few times...

I have a Duet 9100 that is leaking in the tub. I did laundry two days ago and today the tub was so full of water that when I opened the door the water poured out of the tub. I would guess that a seal somewhere had gone bad. Where should I look?

Hi everyone, I was doing some cleaning on my Whirlpool Duet washer today to try and clean out some of the mold issues. Found some great information on this site on cleaning the gray rubber boot and doing a bleach wash cycle, thanks so much! I noticed that there is a clear plastic compartment...

While cleaning out the mold that had developed on the gasket of my front-loader, I moved the drum forward and back and heard sloshing. Is it normal for water to not drain completely out? The gasket around the door does not create a seal around the drum as I've seen on the new Duet WFW9150...

My Duet has leaked in the Delicate cycle for a while, but recently I ran a couple comforters through the Bulky cycle and there was a lot of water that leaked out. It does not leak on Normal, Whitest Whites, or Sanitary. The rubber boot at the door doesn't have any tears. How should I proceed...

I have a whirlpool Duet Washer Model GHW9150PWO That has had numerous problems over the years. Now it has developed a vibration in the spin cycle. I have taken the panels off and all of the shocks and springs are intact. Upon further inspection it appears that the tub (basket) itself is running...

I was wondering if I could get some feedback from people about their experiences with their whirlpool duet washers and the infamous F11 error code. Seems like this error code has been happening to a lot of people with fairly new, just out of warranty washers. Please provide some details of your...

Hello, my washer just gave me the F11 code and won't work. I've done some checking online and looks like this is a pretty common problem. I read a tread on this site that had a link to the service manuals for 9100 model washers. I was trying to find a link the the 9400 models but had no luck...

Hi, I was searching through dry clothes, and moved the drum, and heard a clack sound, almost like a trip switch or something. My wife called me this morning, told me the dryer wont start. The panel works fine, but when she presses start it beeps and nothing happens. Had her run the...