error code

  1. B

    AEQ6000ES2 E8C Error Code

    Im at my wits end with my dryer! I got it from a guy on Craigslist for cheap cause the control board needed replacing (power surge burnt the board) I replaced it and it started up got hot a spun for about 2 min beeped once and displayed PAU. I checked the codes and it said E8C I've...
  2. P

    Maytag 200 Series - F6 E1 and F1 E2 errors during rinse cycle

    My 3 years old washer started displaying the F6 E1 error after I replaced the fill hose (major leak dripping down the bottom plate, but the error didn't appear until after I replaced the hose). I could cancel and restart the wash but with the same result. Once it displayed the F1E2 error, but...
  3. N

    Error F20 even after replacing water inlet valve and pressure switch

    I have a Kenmore washer model number 110.47532601 that keeps giving me a F20 error code. I have taken off all hoses and filtered and cleaned them out that did not work so I purchased a water inlet valve and a water level pressure switch and it still is giving me the error. I took the air hose...
  4. J

    Frigidaire Affinity stops upon arriving at the spin cycle E43

    The machine stops upon arriving at the spin cycle. When you put the machine in "spin only" it runs for 1 minute then shuts down regardless of the speed setting. I checked and got E43. I was told to change the door lock switch, which I did, but am still having the same issue. I also been told it...
  5. N

    Heating issues & error code

    I am having several issues with my Maytag oven, model # MGR5755QDW. A brief history before I provide the current problem: I was previously unable to change the temperature from °C to °F; one day an error code (SAb) appeared on the display and would not turn on. It would simply beep, read...
  6. C

    How to Retrieve Error Code on Frigidaire Gas Dryer

    I recently purchased a Frigidaire Gas Dryer (FAQG7001LW0) from Lowe's. The unit was serviced a few days ago (the blower assembly needed replaced) and following the service, the dryer does not heat and it turns off after 10 minutes of running. I am attempting to retrieve any error codes (if there...
  7. R

    FIXED Kenmore 417 washer switches to "No Spin" mode at rinse time & won't spin in diagnostic mode

    Kenmore 417 washer switches to "No Spin" mode at rinse time & won't spin in diagnostic mode Kenmore washer model 417.44052401 (Good model) built 01/2006. The washer tumbles properly (Door Locked, Add Garment and Washing lights are lit) but at the point of the first rinse it immediately switches...
  8. Q

    Err 20 on Tumble Action washer

    My less than 2 year old Kenmore Tumble action washer is giving me problems. Did a load of laundry today, it won't spin. Gives Err20 and lots of beeping and lights blinking, had a hard time opening the door, used the "option" button and finally got it open. Tried again with just a spin cycle...
  9. S

    Need help with error code F09, Kenmore Elite Ht3 #110.42922200

    Hi, My frontload wash machine displayed error code F09 two days ago. I did some researching, and know that this code indicates an overfill problem. Feeling as if this a little over my head, I called a local repairman, he unscrewed the drain pumpfilter and found it was clogged with a bunch of...
  10. D

    Whirlpool Duet F11 error code, feedback requested

    I was wondering if I could get some feedback from people about their experiences with their whirlpool duet washers and the infamous F11 error code. Seems like this error code has been happening to a lot of people with fairly new, just out of warranty washers. Please provide some details of your...
  11. D

    FIXED Whirlpool WFW9400ST00 F11 code/service manual

    Hello, my washer just gave me the F11 code and won't work. I've done some checking online and looks like this is a pretty common problem. I read a tread on this site that had a link to the service manuals for 9100 model washers. I was trying to find a link the the 9400 models but had no luck...
Top