fuse

  1. W

    Indesit fridge freezer stopped working

    We have an Indesit fridge freezer from about the late 0's. We noticed the fridge was not cool, and in fact got warm on top. Turns out the years of weight on the door had bent it just enough to misalign the light switch with the bump it should press against. The bulb ended up melting the...
  2. A

    KUDI01ILBL5 KitchenAid Diwshasher Not Starting (flashing light) or When Started, Stops After 7 seconds

    I had to turn the breaker/fuse off for one hour (half hour did not do the trick); after that time, I got dishwasher to start. When I turned on the fuse, the normal button was on and not blinking. However, once the dishwasher started, it went off after seven seconds. I turned off the breaker/fuse...
  3. D

    FIXED Kitchenaid Dishwasher KUDS35FXSS8 - no power, can't find fuse location

    I have about a 5 year old Kitchenaid Dishwasher model#KUDS35FXSS8 that just stop working. No lights or power. Breaker in the electrical panel didn't trip. I've done a bunch of research online and think that maybe the dishwasher fuse may need replacing but haven't found the location of the...
  4. C

    JDB8700AWS3 Dishwasher Control board fails

    Hi, I have purchased this dishwasher five years ago. By now I have replaced the control board four times. The trouble I see is, it does not start. First time I have replaced the pump assembly, heater, and even the top panel, then I found out the main control board is not working. After that I...
  5. JacobJ

    JVM3160RF4SS Fuse blowing - Possibly related to turntable

    I have a GE JVM3160RF4SS Microwave and the turntable started making some noises and the fuse blew a little after that noises started. I changed the fuse and it blows again after a few minutes. When I start a heating cycle and turn off the turntable immediately it doesn't affect the fuse and...
  6. Y

    FRS26LH5DS3 Frigidaire Refrigerator Evaporator Fan Not Working.

    We have a Frigidaire FRS26LH5DS3 Refrigerator that had the evaporator fan motor not working. I replace the fan with a new one and it seemed to be working, however as I was putting the back cover of the freezer back on one of the wire nuts came off of the new wires and it made a big spark and...
  7. K

    665.13222N412 Wash Motor Won't Start - F8 Fuse 33 Ohms

    Wash motor stopped running. I've got the front pulled off. I tested F8 using the front leads and it read 33 Ohms which I believe means it needs to be replaced. Where is the motor fuse???? I tried to track the lead wire but that wire harness is confusing.
  8. B

    PHP900 Induction cooktop is dead.....

    My fabulous, reliable induction cookstop stop last night as I was cooking potatoes......there was a clunk (I thought for a second the glass had broken) and all the lights when out. The breaker had tripped, so I reset it and nothing.....we've checked the power supply to the breaker and to the...
  9. I

    ARE35083 Old stove gradually broke down, now nothing works

    Hello, So we have an Admiral stove which is at least 15 years old. It had been working fine but at one point last year, 2 of the burners stopped working. We were fine just using the other ones. Then the other day, I was using the remaining 2 burners at the same time, and everything stopped...
  10. N

    JVM3160RF2SS GE OTR Microwave doesn't turn on - Thermal Shutoff and Internal fuse - both are blown -

    Bought this GE microwave - JVM3160RF2SS slightly more than an year ago from Sears. Installed it myself. Now yesterday I see that it doesn't power on. I opened the microwave to see that the internal 20 A fuse is blow. I was about to replace the fuse and turn it on..Decided to do a bit of...
  11. K

    790.41023800 Stove top wont turn on - overheated

    I turned all the burners on my stove-top on at once to help heat my house. I checked on it and everything seemed fine until it just turned itself off and now nothing on the stove-top works. Nothing happens when I push the buttons. The oven is fine. Did it overheat? Is there a fuse that can...
  12. P

    GMC305PRB01 Whirlpool microwave blew fuse. Replaced fuse, HV transformer and diode - still no heat.

    The microwave of my GMC305PRB01 blew the 15AMP fuse (a 20AMP MDA was actually installed from factory). While replacing the fuse and noticed the red lead to HV transformer had come lose and touched the transformer case. I suspected this might be way the fuse blew. I reconnected the lead. Turned...
  13. S

    KUDA03CTBS1 High voltage burnout of control board

    Hi all: So I have an oddly burned out control board for my dishwasher. It failed during a wash cycle or right at the end, possibly at pump out, with a complete shutdown (no life in the panel) and a burning smell. My hope was that it was just the bimetal fuse - which is in fact blown - but the...
  14. P

    FIXED GDF620HMJ0ES Likely electrical problem - what have I fried?

    I have a fairly new dishwasher that recently stopped working. It seemed to stop after plugging in a battery charger into an outlet above the dishwasher, but I now think that must have just been a timing coincidence. No breakers had flipped. The dishwasher is hardwired to an appropriate 20A 120V...
  15. R

    Unit Fills With Water then Stops - Cancel Does Nothing

    KitchenAid model KUDS24SEAL1 stopped working on Thanksgiving. We ran one load fine. Set it to run a second load overnight and found it had stopped mid cycle with water still in tub. Command panel lights. Cycle will start, run water, then stop. Canceling does not drain water. I tested fuse...
  16. Y

    Right fuse for NN-ST479S? Value and material?

    Hi guys, I am really impressed with the amount of knowledge circling around here :) I've just bought a used Panasonic NN-ST479S as my old noname one finally gave up after ten years. I was told that the fuse keeps blowing on this new one but other than that is fine. As it came with the lid...
  17. N

    FIXED Door Switch AND fuse question

    My Maytag microwave (mod# MMV4205BAB) does not heat food, but retains all other functionality (light, fan, turn table, display, etc). I performed some basic tests on a lot of components with my multimeter (capacitor, diode, thermostats, transformer, and magnetron) everything looked ok. Then I...
  18. C

    Whirlpool Dryer

    One day when pressing the start button nothing happened. There was no sounds or anything. I have checked the following and they test good on the ohm meter. Thermal fuse Door switch Start Switch Motor Timer All of the wiring is intact and working good. The power supply is good, and the...
  19. C

    Whirlpool Dryer Model #IED4400UQL Parts

    I have the following items for sale for a Whirlpool dryer The parts are off of a Inglis dryer which is made by Whirlpool. Thermal Fuse-Part No. 3392519 Start Switch-Part No. 3977456 Door Switch-Part No. 3406109 I also have a motor that is on the dryer. The dryer went out and I cannot...
  20. O

    Whirlpool Quiet Partner II - flashing green lights and burnt smell from control panel area

    I have a Whirlpool Quiet Partner II that is about 6 years old. No complaints with the machine, it does great and I've never had any problems. 2 nights ago, 20 minutes into a cycle the machine started to emit a burning smell from the control panel area. I can only relate it to the plastic...
Top