1. B

    Kenmore Washer Gearbox failed again under 4 years?

    Looking for advice on whether I should consider this normal or a signal to get a different "more reliable" (LOL) washing machine. My gearbox is going out again on my Kenmore Washer 110.21302012. This is less than 4 years of service out of the replacement gearbox I installed in Feb 2018. It has...
  2. C

    Whirlpool Cabrio Washer WTW5600XW3 - Do I have a bad gearcase?

    I have a Whirlpool Cabrio Washer WTW5600XW3 that stopped spinning and started throwing F7 E1. It had all the symptoms of a bad actuator, so I replaced that along with the splutch kit (splutch, pully, belt.) Machine still won't spin and still throws F7 E1. I'm wondering if I have bad bearings...
  3. S

    Maytag Washer MTW5700TQ0 can’t remove gearbox

    Washer has issues with spinning. Took it apart to repair agitator and clutch, but can’t get transmission gear box off What am I missing?
  4. T

    MVWX655DW1 Maytag Washer unstable spin cycle

    My Maytag bravos MVWX655DW1 has an unstable spin cycle. I researched this and took off the washplate to inspect the hub. No question it is has been stripped. During my research I also watch a couple of videos of people removing the basket. They needed some fancy pulling tool (or a car jack in...
  5. B

    Replaced gearbox, now tub is banging and cycles are crazy

    I replaced the gearbox, because the old one was squeaking during spin cycles. I ran the calibration in diagnostic mode and thought all was well, but had issues when I tried a load of wash. The tub now bangs when trying to spin. I checked the suspension, and everything seems to be fine. The...