he3

  1. H

    FIXED 110.42822201 Kenmore He3 Elite washing machine and dreaded FH error code

    I have a Kenmore Elite He3 washer machine (Model #: 110.42822201, circa ~2000?) that has stopped working now and is throwing the dreaded FH error code and i was hoping one of you could help me in diagnosing the problem? CHECKED LIST: checked the pump cleanout and made sure it was clear...
  2. M

    Door switch : Kenmore 110.42822201 HE3 no power

    This machine has been working flawlessly, and now - nothing. As in no lights on the control panel. It acts as though it's not plugged in, or has blown a fuse. I've seen other posts on here that refer to the door switch, but they all mention that the control panel is showing power. I'm getting...
  3. B

    FIXED Kenmore He3 Gas Dryer main burner randomly not igniting

    Model # 110.94836201. Clothes weren't drying, so I started down the tech sheet troubleshooting list. The entire exhaust line from the lint trap to the vent outside the house was lint-free and the gas line is open and no other gas appliances in the house are having issues. The blower is working...
  4. A

    FIXED 110.92824101 Gas flame comes on for a couple minutes...

    Hello, Replaced the thermistor as clothes would not get dried. Was not the problem. Gas flame comes on for about 2 minutes, then shuts off. Passageways are clear. Did the diagnostics and got "03". Thank you!
  5. C

    FIXED *VIDEO* HE3 Error 10 11 Flashing Light. What Error?

    Hello, The washer was a Craig's List purchase. The owner said it was having the door lock issue for which he replaced the door lock twice in the past and has now moved to a new unit. I felt confident in my ability to replace parts so I did just that. Replaced door lock switch assembly Replaced...
  6. R

    Kenmore HE3 - Things that go thump-thump in the night?

    I just bought a used Kenmore HE3 dryer. When I first started the unit I noticed it had a strange noise, a thump – thump sound. It appears to happen on every rev. of the drum. I could not isolate the cause but I think it’s coming from, when the rear rollers pass over either the sewn seam in the...
  7. L

    Kenmore Elite HE3 Dryer - Blower Wheel Problem

    I noticed that the blower wheel was a bit wobbly when I was cleaning my machine out. I searched this forum and found answers as to how to remove the wheel, but when I try, it just spins. I cant tighten it, or loosen it. It seems to spin Ok while the unit is running, but I would rather replace it...
  8. G

    FIXED Kenmore Elite HE3 -- E1 Error

    Hi. We have an electric Kenmore Elite HE3 and for some time now it has been intermittently showing an E1 error and stopping in the middle of a drying cycle. Lately it's been getting worse -- it almost never completely dries the load without being restarted multiple times. I'd be very grateful...
  9. T

    HE3 Control Panel lights

    Hi: The lights on the control panel for my HE3 washer (110.42936200) either won't come on or will blink. The lights in question are the spin speed and the beep sound level. I have replaced the board where these buttons are once and really dont want to have to do it again unless necesary. By...
Top