ice maker and water

Ice maker is not getting water. I tried to replace an ice maker itself then inlet valve but nothing has changed. There is no water going into the ice maker. Water dispenser works fine and the filter is new. Cables lower between the door and a cabinet also seem fine

Hello! I have a Kenmore fridge/freezer. The ice maker is not working. It is not getting water. I've replaced the water filter and the water inlet valve. I checked the water line to the ice maker and water it not getting past the valve. The door water dispenser does work, so that valve is...

So, I started with an E2 error on test 56, so I got a new ice maker. After installing, it made a full bin of ice pretty quickly. I dumped it to start fresh, and since then, no ice. When I run test 45, it sounds like the valve opens and it is filling, but there is no water entering the ice...

The ice maker cycles but produces no ice. I replaced the soenoid but still no water in the ice maker. Line is not frozen. Bad ice maker?

I’ve changed the filter yesterday and reset the status which seemed to work for the days. No idea why it reads “0L Left”. Any ideas how to remedy? Ice maker isn’t working and it’s my guess because of this zero L left. The fridge wants me to change it I guess. No support in the manual for...

As title suggests, ice and water not dispensing. Dispenser light comes on. Tested paddles, solenoids and water pressure. Diagnostic mode shows 1 when water dispenser paddle Is depressed. If I plug the fridge in and quickly hit the paddle to dispense water it comes on and dispenses then won’t...

My Whirlpool is only making a few ice cubes a day and dribbling water when pressed. Sometimes no water at all. Ice and water doesn’t get used very often. I have changed filter and tried without filter with same result. So Ibput the old filter back in. It has probably made 20 small ice cubes in...