inglis

  1. A

    FIXED Inglis Stove Model IBE56000 oven doesn't work

    The oven died yesterday. Stove elements and everything else work fine. I checked the fuses and they are fine. So I opened the back panel and found a burned out connector. Photo should be attached. Would it be ok to splice the wires with screw-on wire connectors?
  2. J

    ITW4871FW1 Inglis (Whirlpool) Washer Squeak only during fill cycle

    Hello! I have a Inglis (Whirlpool) Model: ITW4871FW1, High Efficiency top load washing machine. During the fill cycle (when the washer is first turned on) it makes an ear piercing squeak as the agitator turns while it fills with water. It does this most times, but not every time the washer is...
  3. J

    IS22AGXTQ00 Inglis side-by-side Defrost Timer Question

    Hello. My Inglis side-by-side is not defrosting. I have tested both the defrost heating element and thermostat for continuity and they both test as working. The defrost TIMER advances, but the heater does not come on. Is it possible for the timer to advance in and out of the defrost cycle...
  4. N

    Inglis dryer will not heat, thermistor suspected.

    Hey all! I'm new to the forums, and I've come with some questions about a malfunctioning dryer (did I come to the right place? ;)). I did not post this in one of the manufacturer sub-forums as none of them were applicable to the dryer in question, an Inglis #YIED7200TW. A bit about myself so you...
  5. J

    Whirlpool Inglis electric dryer won't heat anymore

    With help from this blog, my own dryer is now fixed. I told my relatives about it and now they want me to help them with their dryer! My cousin has an Inglis by Whirlpool. It's electric. Model # IED3300VD1. Type is DWJR-ELE-240606-FM54, if that's also helpful. The dryer can turn on and spin...
  6. C

    FIXED Inglis Range Door Staying Locked Since Self Cleaning

    Hi, We have an Inglis IBP58500 Self Cleaning Range. Recently we turned on the clean cycle and went to bed. When we woke up in the morning the oven door was stuck in the locked position. Because of that we are not certain if it completed its full cycle or not. However when I removed the back...
Top