Problem: after 1 of the two suspension springs broke, washer will not enter fast final spin mode
Attempted solutions:
- Replaced both springs; washer agitates but does not enter final spin so clothes come out soaking wet
- Replaced door lock mechanism; believed faulty door lock could be...
Working on a Kenmore 61712 stacked washer and dryer combo. Purchased it used very cheap almost a year ago for a rental, never had issues, until now. The dryer starts to run for about 2-3 seconds and then shuts off.
This unit is installed outside in a carport, it has a roof covering it from...
My 5 year old Kenmore Elite Top Loading won't fill. I may have narrowed it down to the pressure switch but want someone more experienced to confirm for me.
I had read online that when I connect my multi-meter set for resistance to these two outside terminals (as shown in photo) I should get a...
Short version
- I'm regularly tripping the Heating Element Thermal Cut Off, even after replacing multiple parts.
Kenmore Elite 110.60942990 Electric Clothes Dryer
Long Version
-About a year ago I had no heat, tested and verified the heater element was bad. Replaced that and all was well...
I'm about to lose my mind with this. Cannot for the life of me troubleshoot it!
About 2 months ago, our Kenmore Elite, at 14 months of age, started operating very inconsistently.
We start a cycle, and the drain pump activates and works, then the hot water fills, then about 50% of the time it...
My 7yo gas range is slow to heat and tops out at about 390 degrees. I replaced the oven igniter but it did not help. I had a Sears guy out, he said the part was bad, so I replaced it again with one from a different website than the previous one. I still have the problem. The igniter and oven...
I have a Kenmore 80 Series. Had been running just fine. All the sudden it only trickles with two small streams in the rinse cycle. It fills both hot and cold water fine. It is not a water pressure issue. It is not a blocked water inlet valve or I wouldn't have cold water to fill for wash...
Happy New Year everyone! I have a Kenmore Dryer shuts off roughly about 10 seconds after starting and the cycle status (drying, cool down, wrinkle guard) blinks. Error code E4A. Anyone knows what the blinking means and what could possibly cause it? I've cleaned it out thoroughly including the...
Hello, and thanks in advance,
I've been having a problem with the door cams on my Kenmore Elite Coldspot refrigerator. Here are the refrigerator specs:
Model: 106.50502990
Serial: SK0851189
Mfg Date: 2000.03
Type: C25SSA00
This fridge came with the house when I bought it. It is a side by...
My parents have a Kenmore Elite, Model # 790.77543806, gas range. The display is going out on it and I believe it is being problematic at times with responsiveness to the controls. I believe that they need a new control panel, but I am uncertain. I am seeking the assistance of the forum:
1 -...
I have a Kenmore Coldspot 106.57712701 that has recently stopped cooling completely on both the refrigerator and freezer side. The compressor and both fans appear to be working and stay on almost all the time. I replaced the capacitor and relay for the compressor hoping it was an easy fix. That...
Model 665.12793K311 Serial F44522380 Kenmore Elite Dishwasher5 years old.
I looked up this problem in the forums and it seems I might be in for a new control board.
It started with an issue where the dishes were dirty and the soap was laying at the bottom of the dishwasher still intact. We...
Hello,
We have a Kenmore that has been leaking about 2 cups of water from the bottom front of the dishwasher for about a month. It leaks two times during a wash. 1) it starts leaking when the rinse cycle begins after filling with water and 2) it starts leaking when starting the wash cycle...
Thanks in advance for your help.
I have a Kenmore laundry center (417.92702200) that was in a home I bought in 2014. This is a stacked dryer. Recently started making a light thumping sound every 1ish seconds followed by 2 short tapping sounds (happy to send audio).
Initially, sounded...
Hi there. I have a kenmore top loading washing machine model 110.20022103 I believe. I have run the tests and in spin modes it will not spin. Some times it will do a full wash fine agitate and spin out but recently way more often then not it will not spin out or agitate. It will start to spin...
The "start" button on my dishwasher control panel has become unresponsive unless you take an object and really push hard against the button to actuate it. The control panel, the piece with all the wash option buttons and the start button, appears to have been discontinued - I cannot find a part...
I have the above listed Kenmore freezer that isn’t cooling. It was gifted to us so there’s no warranty available. We changed the evaporator fan motor but it isn’t turning at all. I also notice that the evaporator isn’t cold or frosty at all. Where would you start troubleshooting? How do I get...
After searching this forum for help on why my Kenmore dishwasher would not drain, I found many contribution by rickgburton on how to diagnose the drain issue, and ultimately how to fix my problem. This was all without needing to make a single post. His contributions also pointed me to a source...
Someone just gave us a Kenmore HE3T that was working fine in its previous house. The washer here in our rental (cheapo top-loader) was about to die, so we took the freebie. Unfortunately, it seems to be draining the water during the wash and rinse cycles as soon as it enters.
During the...
I have a Kenmore Coldspot 106.56703500 that seems to be having an issue with keeping the freezer and fridge cool; they are basically room temp.
I've cleaned the coils, fan, and everything under the fridge, but it didn't seem to help.
The condenser is also warm to the touch so I know it is...