range

  1. R

    MGT8885XB02 Maytag Gemini natural gas range knob will not turn

    The range knob broke so I took off the face plate and looked at the assembly. I tried to turn the dial with a pair of pliers but it still wouldn't turn on. Is there anything else I should try or a part that I should replace?
  2. 9

    Thermador bad Board Error code 22 leads to Cooling Fan Error Code 43 & discontinued fan 00486894 FYI

    Thermador bad Board Error code 22 leads to Cooling Fan Error Code 43 & discontinued fan 00486894 FYI Hi DIYers! Posting this for posterity. We had a power outage and when we awoke our Thermador range PGR486GDZS/01 was blinking error code 22, which means bad control board. We ordered a new...
  3. F

    Dynasty DGRS-30-4 oven thermostat

    I've got a Dynasty range, model DRGS-30-4. The oven keeps overshooting the set temperature, blowing way past it every time we use it. I want to replace the thermostat, but it's no longer being manufactured. Dvorson's, in California, seems to be the only place that has most parts for these (we've...
  4. R

    FIXED RF366PXGW0 Whirlpool Range back right burner slow to heat

    We have an older Whirlpool electric range (Model #RF366PXGW0) where the back right burner is slow to heat. It takes about two to three times as long as the others to come to temp and may also be underheating. After doing some internet learning, I am guessing that replacing the switch may be the...
  5. H

    790.75503204 Kenmore Elite Dual Fuel Range - Replace Door light switch

    Hi All, First time post! I need help with replacing my door light switch on the main oven of my range. I have the part. I am unsure if I need to remove the right side of the oven or open up the top where the burners are. Kenmore Elite Dual Fuel- Model #790.75503204 History: About a year ago...
  6. 7

    Samsung Electric Range shot flame from back

    Model number reads NE595R0ABSR/AA Background: This is my first post here, but looking for help. Didn't much in a search yet. I've owned this oven for a little over 3 years. My girlfriend and I don't cook every night but cook Pizzas, and make mac n cheese on the stove top. I don't think i've...
  7. R

    Non-destructively adding an oven ignitor and oven light to 1930's era Margic Chef stove/oven?

    Model Number: 1000 Brand: Magic Chef Age: More than 10 years We're in the process of getting a late 1920's era Magic Chef range, of the 1000 series, and I wanted to ask a couple questions. Do both ovens, and broiler, require manually lighting? I'd read that the burners use pilot lights, so...
  8. D

    Sears Kenmore Elite electric range 970.97473800 Triple Element Issue

    Hello, I recently replaced my triple burner element (part #318297805) on my Kenmore Elite electric range (model 790.97473800) since the "middle" section of this element was not turning on. After replacing it, I'm having the same issue! I believe it has to be something further up in the...
  9. K

    Whirlpool/Ikea range progessive failure

    I have a Whirlpool/Ikea 36" five-burner dual fuel range (YIDC875SS) whose oven stopped working yesterday. Selecting the timer, oven setting and temp appear to turn the oven on (light inside the oven turns on, no preheat indicator light), but it does not heat up. I tried flipping the breaker for...
  10. S

    Wolf CP36 G/S Gas Cooktop 1 igniter has failed.

    I have a Wolf gas range, CP36 G/S. No oven is attached. One of the burners has had a problem for a while, I turn that burner on and the spark unit sparks, the gas starts and lights, but the spark lighter keeps clicking and sparking. Yesterday, that one burner did not ignite...
  11. S

    FIXED Kenmore Range Error Code E0 F3

    I have a Kenmore Electric Range (Model No. 665.95152300). The oven will start to heat, but will cycle off and on several times and it never reaches proper temperature. Cook tops and clock all work fine. When I press and hold the Stop/Clear button for 5 seconds, I get an E0 F3 error code. I...
  12. S

    Need help finding parts for 60s Hotpoint electric stove/oven

    Hello. I'm hoping someone here can help. My wife and I purchased an old turquoise Hotpoint electric stove/oven recently. I'd like to get it working so we can use it (obviously). The oven works but only one burner comes on. The burner that does come on only works on high. I did some resistance...
  13. J

    Range totally dead

    I haven't used my stove for a couple days, and wasn't going to use it today, just happened to notice that the display was black, no clock displaying. Buttons are totally dead. Gas will still flow to the burners, but no ignition either, which I expected since all else was dead. No light when...
  14. A

    FIXED VGSC306-4BSS Replacing Lights Switch on Viking

    Flush with confidence after getting the necessary help from Rick and VikTech to solve my Viking oven igniter problem I feel empowered to tackle the other remaining problem with the Viking range that was in the house I recently bought: a broken "Oven Lights" switch. Existing switch: The switch...
  15. B

    Oven not working

    I just got a kenmore elite duel fuel range from a friend. The unit sat unused for the last couple years and when I installed it the burners work great but the oven isn't operating at all. When I first plugged it in the red PF light came on and I got that taken care of(had to try several times)...
  16. N

    Selling 1946 Kelvinator "Automatic Cook" Electric Range

    I am moving in a couple weeks and can't take it with me. I don't want to leave it behind and risk getting scrapped. It is in perfect working order. It needs a little cleaning, but not too bad. Most everything works that I can tell. The lights above 4 of the dials still work. The one over...
  17. S

    Options to replace NLA tubing on Jenn-air Range CVGX2423B

    I'm new to the forum, but not new to DIY repairs. I'm currently fixing a stuck front right burner valve. On tightening the compression nut for the burner tubing exiting the replaced valve I did not notice until too late that the 1/4" tubing twisted on itself. My bad luck, and apparently I'm...
  18. B

    Problem Defective Infinite Heat Switches

    I came across this site by pure chance while searching for a new infinite heat control for my Frigidaire range. This 5yr old range has had the infinite heat switch replaced THREE times now. Same problem as always. Popping and buzzing sounds, followed by eventual failure of the entire...
  19. T

    1954 Fridgidaire Range, Craigslist find

    Just thought I would share my new stove that I found on Craigslist. Its a 1954 RS-28 Dual Oven Fridgidaire Timer model found for $200 about 100 miles away from my house. She works great other than the clock being a bit slow. I am missing a couple of small knobs on the clock and will someday...
  20. T

    GE Range Self-Clean Timer Electical Contact Replacement

    Hi, My GE range will not go into self-clean mode. I believe the problem part is the bimetalic electrical contacts mounted on the back of the oven timer. The part has two electrical contact strips; one for self-clean mode and one for timed bake mode. The self-clean mode contact strip appears...
Top