FIXED 110.25132411 Kenmore washer Cannot get hub off after breaking washplate

[chanko]

Model Number

110.25132411

Brand

Sears Kenmore

Age

6-10 years

Hi as stated in the title I have a Kenmore 110.25132411 top-load washing machine I have replaced the actuator, drive belt and splutch parts first because my washplate was stuck. After breaking the washplate off I cannot seem to get the hub off because there is still something stuck(gear) on the drive shaft. I have attached a photo any recommendations would be much appreciated.

All the videos Ive watched made this look so easy but that dam washplate wouldnt budge and now im stuck here with no washplate and no way to get the hub off

Corrected model number

 

[chanko]

Currently my washer used to only agitate but not spin before breaking the agitator off while making a grinding or rubbing noise. After reading several threads on here it seems that replacing the hub is the likely culprit but i cant seem to get it off. i have removed the screws and the plastic catch but it doesn't fit over that gear i assume it comes off but its extremely stuck

 

[Jake]

You posted two different model numbers, neither pull up good.

Take a photo of your model number tag and upload it here.

Click here: Appliance Parts

Then you will see a link that says: How to find a model number.

Jake

 

[chanko]

Hi Jake thanks for responding my model number is 110.25132411

sorry for the mistakes above


I was looking at one of your last replies from;
https://www.applianceblog.com/mainf...washer-model-110-25132411-not-spinning.74395/

110.25132411 Kenmore Washer - Impeller removal

Customer Problem: Washer would not go into spin cycle. I did run self Diagnostics... when it got to Spin Cycle it wanted to agitate fast, then shut down on overload. Troubleshot and determined it needed a new Washer Cam Splutch Kit and a new W10528947 Hub Kit. Problem: I can not get the impeller...

www.applianceblog.com

and it looks like that piece is suppose to come off with the wash plate, but I just wanted to make sure before I cut it off.
also does the new washplate have that piece inside it to slide back onto the drive shaft

 

[chanko]

Just to keep anyone interested updated I was able to get it off with a Dremel and grinding wheel. I cut it down on both sides as far as i felt comfortable then took a chisel to knock it off. Currently waiting for a new hub and wash plate to see if that fixes the problem

 

[Jake]

Thanks!

Good job getting it off.

Its the transmission(gearcase) that's bad too, the transmission is leaking oil.

Here's the transmission(gearcase) for your model: W11454734 Gearcase

Jake

 

[chanko]

Just out of curiosity what makes you think its the transmission. I have not seen any oil. Also once i got the hub off it was completely worn down

 

[Jake]

Look at your photos in your first post, you don't see that black oil/black grease? I surely do!

Oh wait, is that black oil or black grease or not?

Jake

 

[chanko]

Im pretty sure that was just grime built up and i filled the screw with wd-40 to try to get it off and thats the black that you are seeing

 

[Jake]

Got it! Thanks for clearing that up!

Let us know how it goes when you get the new hub and washplate installed.

Jake

 

[chanko]

FIXED: Just to give you an update/ overview for anyone who experiences the same problem:

Washer started to make a grinding noise during the wash cycle.
by tricking the lock switch I was able to determine that the agitator and the basket were not spinning.
The wash plate was rusted on and I could not remove it so I tried replacing the splutch and the actuator which did not resolve the problem
I ended up having to cut the wash plate off and remove the gear pictured above using a dremel
After replacing the Hub and adding a new wash plate everything thing is working in order

Thanks again Jake If it wasnt for your responses in several of the other posts i never would have figured this out

 

[Jake]

Excellent chanko, glad to hear the new washplate and hub fixed it.

Thanks for the update!

I'm posting the links to the washplate and hub for your model below, in case others need them too.

Here's the washplate for your model:
W10752285 Washplate


Here's the hub for your model:
W10528947 Hub


Jake