FIXED 110.C85872400 Kenmore HE4 dryer dead

[Bluenoser]

Model Number

110.C85872400

Brand

Sears Kenmore

Age

More than 10 years

This morning I noticed lights were on the dryer display even though the dryer finished its cycle last night. Pushing the pause/cancel button cleared the lights but they can back on after a few seconds. I decided to unplug and replug it back in. Now no lights come on at all, regardless of which buttons are pushed. I happened to have a spare control board and switched that out but it did not make a difference. Any suggestions where to start? Thanks. Jon

 

[Jake]

Sounds like the Console Electronics and Housing has gone bad.

I'm attaching your tech data sheet below. DO--->TEST #5 Button and LED Test.

Here's the Console Electronics and Housing for your model:
Touchpad and Control Panel 280086


Jake

 

[Bluenoser]

Finally figured out it that the breaker in the panel was faulty. One side was showing 110v and the other only 20 v! New breaker and everything seems to be working fine. Thanks.

 

[Jake]

Excellent, glad that was all it was.

Thanks for the update!

Jake