November 28th, 2007, 09:11 AM
Calibration of electronic oven
I have a whirlpool wall oven model #RBS275PDB6
serial # XH4501139 the oven is under heating at 350 it is actually only about 275. Does anyone know if you can recalibrate the oven . I know that on most Frigidaire ovens it can be changed about 85 degrees,but I don't know about whirlpool. This oven seem to work fine except it is reading too low. Thanks
November 28th, 2007, 10:40 AM
Yes, it can be calibrated. Give me your e-mail address and I'll send you the tech sheet. It's too large to post here.
OWNER RICK'S APPLIANCE REPAIR
APPLIANCE TECHNICIAN FOR 31 YEARS
ONLINE SERV TECH: ApplianceBlog.com
CERTIFIED TYPE 1; TYPE 2.....REFRIGERATION SERVICE E.S.
By spthomas in forum Whirlpool/Roper/Estate
Last Post: November 11th, 2013, 08:31 AM
By standard in forum Sears Kenmore
Last Post: October 18th, 2007, 07:19 AM
By kjr232 in forum Frigidaire/Tappan/Electrolux
Last Post: May 26th, 2007, 11:11 PM
By khome in forum Frigidaire/Tappan/Electrolux
Last Post: June 28th, 2006, 04:40 PM
By fatback in forum Frigidaire/Tappan/Electrolux
Last Post: December 3rd, 2005, 06:12 AM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!